The origin of Al(OH)₃-rich and Al₁₃-aggregate flocs composition in PACl coagulation

The composition of hydrolyzed Al species is essential for the understanding of coagulation with Al-based coagulants. Surface characteristics of flocs formed by coagulation with two distinct polyaluminum chloride (PACl) coagulants were identified. One commercial coagulant (PACl-C) with voluminous monomeric Al and colloidal Al(OH)₃ and a custom-made PACl (PACl-Al₁₃) containing high Al₁₃ content were applied to destabilize kaolin particles. The flocs formed by PACl-C and PACl-Al₁₃ at neutral and alkaline pH ranges, respectively, were observed by FE-SEM and HR-TEM. In addition, the Al composition of these flocs was characterized by XPS and HR-XRD, and the imaging of Al(OH)₃ precipitates and Al₁₃ aggregates were conducted by SEM as well as tapping mode AFM in liquid system. The observations of flocs indicate that the morphology of Al(OH)₃-rich flocs are fluffy and porous around the edge of flocs, while the Al₁₃-aggregate flocs have a glossy contour and irregular structure. Both Al(OH)₃-rich and Al₁₃-aggregate flocs do not possess well-formed crystalline structure except for the Al₁₃-like crystal exists in the Al₁₃-aggregate flocs. Among Al(OH)₃ precipitates, colloidal Al(OH)₃ is micro-scale in size, while amorphous Al(OH)₃ is nano-scale. During the formation of Al₁₃ aggregates, some coiled and clustered Al₁₃ aggregates with smoother surface were observed. The XPS study on floc surface showed that tetrahedral (Al^IV) /octahedral (Al^VI) Al ratio on the surfaces of PACl-C and PACl-Al₁₃ flocs is 1:1.6 and 1:9.9, respectively. Of the in situ formed Al₁₃, almost half of Al-hydroxide precipitates on the surface of Al(OH)₃-rich flocs possess the Al^IV center. It also found that the irregularly aggregated Al₁₃ with a similar Al₁₃ crystalline structure subsists on the surface of Al₁₃-aggregate flocs.