Switched Low-Noise Amplifier Using Gyrator-Based Matching Network for TD-LTE/LTE-U/Mid-Band 5G and WLAN Applications

Ching Han Tsai*, Chun Yi Lin, Ching Piao Liang, Shyh Jong Chung, Jenn-Hwan Tarng

*此作品的通信作者

研究成果: Article同行評審

1 引文 斯高帕斯(Scopus)

摘要

This paper presents a triple-band low-noise amplifier (LNA) fabricated using a 0.18 m Complementary Metal-Oxide-Semiconductor (CMOS) process. The LNA uses a double-peak load network with a switched component to accomplish the triple-band operation. Moreover, noise reduction using a substrate resistor to ameliorate the noise performance is presented. Noise reduction of 1.5 dB can be achieved at 2.5 GHz without additional dc power and extra manufacturing costs. An input matching technique is realized simultaneously using a gyrator-based feedback topology. The triple-band LNA can be realized by using a dual-band input network with a switched matching mechanism. The target frequencies of the triple-band LNA are 2.3-2.7 GHz, 3.4-3.8 GHz, and 5.1-5.9 GHz, covering the operating frequency bands of time-division long-term evolution (TDLTE), mid-band Fifth-generation (5G), LTE-unlicensed (LTE-U) band, andWireless LAN (WLAN) technology. The measured power gains and noise figures at 2.5, 3.5, and 5.2 GHz are 12.3, 15.3, and 13.1 dB and 2.3, 2.2, and 2.6 dB, respectively.

原文English
文章編號1477
頁(從 - 到)1-13
頁數13
期刊Applied Sciences (Switzerland)
11
發行號4
DOIs
出版狀態Published - 2月 2021

指紋

深入研究「Switched Low-Noise Amplifier Using Gyrator-Based Matching Network for TD-LTE/LTE-U/Mid-Band 5G and WLAN Applications」主題。共同形成了獨特的指紋。

引用此