Mold filling and cure modeling of RTM and SRIM processes

L. James Lee; W. B. Young; R. J. Lin

doi:10.1016/0263-8223(94)90072-8

Mold filling and cure modeling of RTM and SRIM processes

L. James Lee^*, W. B. Young, R. J. Lin

^*此作品的通信作者

生物藥學研究所

研究成果: Article › 同行評審

130 引文斯高帕斯（Scopus）

摘要

This paper is to discuss the modeling and computer simulation techniques of liquid composite molding processes, i.e. resin transfer molding (RTM) and structural reaction injection molding (SRIM). Mold filling and curing are simulated using control volume/finite element methods. Several case studies are presented.

原文	English
頁（從 - 到）	109-120
頁數	12
期刊	Composite Structures
卷	27
發行號	1-2
DOIs	https://doi.org/10.1016/0263-8223(94)90072-8
出版狀態	Published - 1994

存取文件

10.1016/0263-8223(94)90072-8

其它文件與鏈接

Link to publication in Scopus

引用此

@article{52e8726ee6ca4344bbd40c451b8bf04f,

title = "Mold filling and cure modeling of RTM and SRIM processes",

abstract = "This paper is to discuss the modeling and computer simulation techniques of liquid composite molding processes, i.e. resin transfer molding (RTM) and structural reaction injection molding (SRIM). Mold filling and curing are simulated using control volume/finite element methods. Several case studies are presented.",

author = "Lee, {L. James} and Young, {W. B.} and Lin, {R. J.}",

year = "1994",

doi = "10.1016/0263-8223(94)90072-8",

language = "English",

volume = "27",

pages = "109--120",

journal = "Composite Structures",

issn = "0263-8223",

publisher = "Elsevier B.V.",

number = "1-2",

}

TY - JOUR

T1 - Mold filling and cure modeling of RTM and SRIM processes

AU - Lee, L. James

AU - Young, W. B.

AU - Lin, R. J.

PY - 1994

Y1 - 1994

N2 - This paper is to discuss the modeling and computer simulation techniques of liquid composite molding processes, i.e. resin transfer molding (RTM) and structural reaction injection molding (SRIM). Mold filling and curing are simulated using control volume/finite element methods. Several case studies are presented.

AB - This paper is to discuss the modeling and computer simulation techniques of liquid composite molding processes, i.e. resin transfer molding (RTM) and structural reaction injection molding (SRIM). Mold filling and curing are simulated using control volume/finite element methods. Several case studies are presented.

UR - http://www.scopus.com/inward/record.url?scp=0028254871&partnerID=8YFLogxK

U2 - 10.1016/0263-8223(94)90072-8

DO - 10.1016/0263-8223(94)90072-8

M3 - Article

AN - SCOPUS:0028254871

SN - 0263-8223

VL - 27

SP - 109

EP - 120

JO - Composite Structures

JF - Composite Structures

IS - 1-2

ER -

Mold filling and cure modeling of RTM and SRIM processes

摘要

存取文件

其它文件與鏈接

指紋

引用此