Liquid phase deposition based SnO2 gas sensor integrated with TaN heater on a micro-hotplate

Jin-Chern Chiou, Shang Wei Tsai, Chia Yang Lin

研究成果: Article同行評審

17 引文 斯高帕斯(Scopus)

摘要

A micromachined liquid-phase deposition (LPD)- based SnO2 gas sensor that is integrated with a tantalum nitride (TaN) microheater on micro-hotplate is designed and fabricated using microelectromechanical systems technology. TaN is available in many traditional complementary metal oxide semiconductor designs, unlike many other microheater materials. For the initial time, TaN is used in semiconductor metal oxide gas sensor as a heater. The thermal response, thermal distribution, and power consumption of the TaN microheater are measured using a thermal imaging camera. The operating temperature of TaN micro-hotplate can exceed 500 °C and they have a favorable thermal distribution within the sensing area. The temperature variation over the sensing area for a TaN microheater with a size of 300 × 300 μm is ∼4% at 500 °C. Its power consumption is successfully decreased by adopting a structure with ratio of edge length of the membrane to that of the microheater of 2.5. The sensing responses of the LPD-based SnO2 gas sensor with the TaN microheater to H2S gas are measured at various operating temperatures. The optimal operating temperature of the designed gas sensors is in the range 250 °C-300 °C. The designed sensing film with an area of 100 × 100 μm has greater sensitivity to a staircase concentration of H2S gas than those with the other two areas (200 × 200 μm and 300 × 300 μm).

原文English
文章編號6494260
頁(從 - 到)2466-2473
頁數8
期刊IEEE Sensors Journal
13
發行號6
DOIs
出版狀態Published - 2013

指紋

深入研究「Liquid phase deposition based SnO2 gas sensor integrated with TaN heater on a micro-hotplate」主題。共同形成了獨特的指紋。

引用此