Flow dynamics in injection molding with microfeatures

Guojun Xu; Dong Hak Kim; Kurt W. Koelling; Ly James Lee

Flow dynamics in injection molding with microfeatures

Guojun Xu^*, Dong Hak Kim, Kurt W. Koelling, Ly James Lee

^*此作品的通信作者

生物藥學研究所

研究成果 › 同行評審

3 引文斯高帕斯（Scopus）

摘要

Filling the microchannels is very important in designing micro-injection molding, microdevices, etc. In this paper, flow dynamics was studied in injection molding with microchannels. A transparent PMMA mold was designed and the flow dynamics was observed. The experiment was performed using poly (ethylene oxide) (PEO) and polyacryamide (PA) aqueous solutions. The transient dynamic flow and flow competition between the base plate and the microchannels were observed. The flow observation was used to explain previous filling length results in microchannels during micro-injection molding.

原文	English
頁面	113-115
頁數	3
出版狀態	Published - 1 5月 2005
事件	Society of Plastics Engineers Annual Technical Conference 2005, ANTEC 2005 - Boston, MA, 美國持續時間: 1 5月 2005 → 5 5月 2005

Conference

Conference	Society of Plastics Engineers Annual Technical Conference 2005, ANTEC 2005
國家/地區	美國
城市	Boston, MA
期間	1/05/05 → 5/05/05

其它文件與鏈接

Link to publication in Scopus

引用此

@conference{958be5e165b74bcc81faf374c6c50098,

title = "Flow dynamics in injection molding with microfeatures",

abstract = "Filling the microchannels is very important in designing micro-injection molding, microdevices, etc. In this paper, flow dynamics was studied in injection molding with microchannels. A transparent PMMA mold was designed and the flow dynamics was observed. The experiment was performed using poly (ethylene oxide) (PEO) and polyacryamide (PA) aqueous solutions. The transient dynamic flow and flow competition between the base plate and the microchannels were observed. The flow observation was used to explain previous filling length results in microchannels during micro-injection molding.",

author = "Guojun Xu and Kim, {Dong Hak} and Koelling, {Kurt W.} and Lee, {Ly James}",

year = "2005",

month = may,

day = "1",

language = "English",

pages = "113--115",

note = "Society of Plastics Engineers Annual Technical Conference 2005, ANTEC 2005 ; Conference date: 01-05-2005 Through 05-05-2005",

}

TY - CONF

T1 - Flow dynamics in injection molding with microfeatures

AU - Xu, Guojun

AU - Kim, Dong Hak

AU - Koelling, Kurt W.

AU - Lee, Ly James

PY - 2005/5/1

Y1 - 2005/5/1

N2 - Filling the microchannels is very important in designing micro-injection molding, microdevices, etc. In this paper, flow dynamics was studied in injection molding with microchannels. A transparent PMMA mold was designed and the flow dynamics was observed. The experiment was performed using poly (ethylene oxide) (PEO) and polyacryamide (PA) aqueous solutions. The transient dynamic flow and flow competition between the base plate and the microchannels were observed. The flow observation was used to explain previous filling length results in microchannels during micro-injection molding.

AB - Filling the microchannels is very important in designing micro-injection molding, microdevices, etc. In this paper, flow dynamics was studied in injection molding with microchannels. A transparent PMMA mold was designed and the flow dynamics was observed. The experiment was performed using poly (ethylene oxide) (PEO) and polyacryamide (PA) aqueous solutions. The transient dynamic flow and flow competition between the base plate and the microchannels were observed. The flow observation was used to explain previous filling length results in microchannels during micro-injection molding.

UR - http://www.scopus.com/inward/record.url?scp=33644957455&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:33644957455

SP - 113

EP - 115

T2 - Society of Plastics Engineers Annual Technical Conference 2005, ANTEC 2005

Y2 - 1 May 2005 through 5 May 2005

ER -

Flow dynamics in injection molding with microfeatures

摘要

Conference

其它文件與鏈接

指紋

引用此