Fabrication of individual aligned carbon nanotube for scanning probe microscope

Shih Chun Tseng, Ching Hsiang Tsai, Chia Hung Lee, Chuen Horng Tsai, Shi Pu Chen, Chao Chiun Liang, Chien-Wen Hsieh, Wei Chih Lin

研究成果: Article同行評審

3 引文 斯高帕斯(Scopus)

摘要

This paper demonstrates the fabrication of a micro-cantilever equipped with a high aspect ratio carbon nanotube (CNT) tip to perform surface characterization with high spatial resolution. A single vertical CNT, synthesized on a freestanding tip-lessmicro cantilever, is intended to be used for scanning probe microscopy (SPM). E-beam lithography and lift-off technique was adopted to define a nano-sized catalyst particle. An individual CNT was then synthesized by using an inductively coupled plasma chemical vapor deposition (ICP-CVD) system. The freestanding individual aligned CNT probe was then used to characterize a silicon nano pillar structure. The surface morphology was scanned in a contact mode and 0.1 nN set-point force. The ultra fine resolution can be characterized without wearing the probe and sample. The CNT probe shows a great potential as a high sensitive sensor operating in an optimally adjusted atomic force microscopy (AFM) system.

原文English
頁(從 - 到)186-189
頁數4
期刊Journal of Physics: Conference Series
10
發行號1
DOIs
出版狀態Published - 1 1月 2005

指紋

深入研究「Fabrication of individual aligned carbon nanotube for scanning probe microscope」主題。共同形成了獨特的指紋。

引用此