Electrothermal microgripper with large jaw displacement and integrated force sensors

T. Chu Duc*, Gih Keong Lau, J. F. Creemer, P. M. Sarro

*此作品的通信作者

研究成果: Conference contribution同行評審

15 引文 斯高帕斯(Scopus)

摘要

This paper presents a novel sensing microgripper based on silicon-polymer electrothermal actuators and piezoresistive force sensing cantilever beams which can monitor the displacement of the microgripper jaws and also the contact force between the tips and the gripped object. A jaw motion up to 32 μm with an output sensing voltage of 49 mV and 114 mW power consumption is measured at a driving voltage of 4.5 V. The working temperature of the structure is then 177°C. The force sensitivity is 1.7 V/N and the corresponding displacement sensitivity is 1.5 kV/m. A minimum detectable displacement and a minimum detectable force of 1 nm and 770 nN are estimated, respectively.

原文English
主出版物標題MEMS 2008 Tucson - 21st IEEE International Conference on Micro Electro Mechanical Systems
頁面519-522
頁數4
DOIs
出版狀態Published - 2008
事件21st IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2008 Tucson - Tucson, AZ, 美國
持續時間: 13 1月 200817 1月 2008

出版系列

名字Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
ISSN(列印)1084-6999

Conference

Conference21st IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2008 Tucson
國家/地區美國
城市Tucson, AZ
期間13/01/0817/01/08

指紋

深入研究「Electrothermal microgripper with large jaw displacement and integrated force sensors」主題。共同形成了獨特的指紋。

引用此