COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si.

Der-Ray Huang; Wen Huu Dow; Pei Chih Yao; Shu En Hsu

doi:10.1557/PROC-58-169

COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si.

Der-Ray Huang^*, Wen Huu Dow, Pei Chih Yao, Shu En Hsu

^*此作品的通信作者

照明與能源光電研究所

研究成果: Conference contribution › 同行評審

摘要

Amorphous ribbons (FeNi)//7//8Mo//4B//1//7Si, made by melt-spinning technique were prepared as magnetic shielding materials. Cylindrical shields (approximately 0. 05mm thick) were fabricated by wrapping ribbons on 20cm long pyrex tubes with 45mm diameter. DC and AC (60Hz, 400Hz, 800Hz, 1 kHz) magnetic shielding data were obtained by following the modified ASTM (A698-74) procedure. By comparing the data to calculations from shielding theory, there is about 8% magnetic shielding effectiveness induced by skin effect at 1 kHz.

原文	English
主出版物標題	Materials Research Society Symposia Proceedings
編輯	Bill C. Giessen, Donald E. Polk, Alan I. Taub
發行者	Materials Research Soc
頁面	169-172
頁數	4
ISBN（列印）	0931837235
DOIs	https://doi.org/10.1557/PROC-58-169
出版狀態	Published - 1 12月 1986

出版系列

名字	Materials Research Society Symposia Proceedings
卷	58
ISSN（列印）	0272-9172

存取文件

10.1557/PROC-58-169

其它文件與鏈接

Link to publication in Scopus

引用此

Huang, D-R., Dow, W. H., Yao, P. C., & Hsu, S. E. (1986). COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si. 於 B. C. Giessen, D. E. Polk, & A. I. Taub (編輯), Materials Research Society Symposia Proceedings (頁 169-172). (Materials Research Society Symposia Proceedings; 卷 58). Materials Research Soc. https://doi.org/10.1557/PROC-58-169

@inproceedings{c6fbeaa1ffb34cea8a3afceeadfedd22,

title = "COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si.",

abstract = "Amorphous ribbons (FeNi)//7//8Mo//4B//1//7Si, made by melt-spinning technique were prepared as magnetic shielding materials. Cylindrical shields (approximately 0. 05mm thick) were fabricated by wrapping ribbons on 20cm long pyrex tubes with 45mm diameter. DC and AC (60Hz, 400Hz, 800Hz, 1 kHz) magnetic shielding data were obtained by following the modified ASTM (A698-74) procedure. By comparing the data to calculations from shielding theory, there is about 8% magnetic shielding effectiveness induced by skin effect at 1 kHz.",

author = "Der-Ray Huang and Dow, {Wen Huu} and Yao, {Pei Chih} and Hsu, {Shu En}",

year = "1986",

month = dec,

day = "1",

doi = "10.1557/PROC-58-169",

language = "English",

isbn = "0931837235",

series = "Materials Research Society Symposia Proceedings",

publisher = "Materials Research Soc",

pages = "169--172",

editor = "Giessen, {Bill C.} and Polk, {Donald E.} and Taub, {Alan I.}",

booktitle = "Materials Research Society Symposia Proceedings",

}

Huang, D-R, Dow, WH, Yao, PC & Hsu, SE 1986, COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si. 於 BC Giessen, DE Polk & AI Taub (編輯), Materials Research Society Symposia Proceedings. Materials Research Society Symposia Proceedings, 卷 58, Materials Research Soc, 頁 169-172. https://doi.org/10.1557/PROC-58-169

COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si. / Huang, Der-Ray; Dow, Wen Huu; Yao, Pei Chih 等.

Materials Research Society Symposia Proceedings. 編輯 / Bill C. Giessen; Donald E. Polk; Alan I. Taub. Materials Research Soc, 1986. p. 169-172 (Materials Research Society Symposia Proceedings; 卷 58).

研究成果: Conference contribution › 同行評審

TY - GEN

T1 - COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si.

AU - Huang, Der-Ray

AU - Dow, Wen Huu

AU - Yao, Pei Chih

AU - Hsu, Shu En

PY - 1986/12/1

Y1 - 1986/12/1

N2 - Amorphous ribbons (FeNi)//7//8Mo//4B//1//7Si, made by melt-spinning technique were prepared as magnetic shielding materials. Cylindrical shields (approximately 0. 05mm thick) were fabricated by wrapping ribbons on 20cm long pyrex tubes with 45mm diameter. DC and AC (60Hz, 400Hz, 800Hz, 1 kHz) magnetic shielding data were obtained by following the modified ASTM (A698-74) procedure. By comparing the data to calculations from shielding theory, there is about 8% magnetic shielding effectiveness induced by skin effect at 1 kHz.

AB - Amorphous ribbons (FeNi)//7//8Mo//4B//1//7Si, made by melt-spinning technique were prepared as magnetic shielding materials. Cylindrical shields (approximately 0. 05mm thick) were fabricated by wrapping ribbons on 20cm long pyrex tubes with 45mm diameter. DC and AC (60Hz, 400Hz, 800Hz, 1 kHz) magnetic shielding data were obtained by following the modified ASTM (A698-74) procedure. By comparing the data to calculations from shielding theory, there is about 8% magnetic shielding effectiveness induced by skin effect at 1 kHz.

UR - http://www.scopus.com/inward/record.url?scp=0022866309&partnerID=8YFLogxK

U2 - 10.1557/PROC-58-169

DO - 10.1557/PROC-58-169

M3 - Conference contribution

AN - SCOPUS:0022866309

SN - 0931837235

T3 - Materials Research Society Symposia Proceedings

SP - 169

EP - 172

BT - Materials Research Society Symposia Proceedings

A2 - Giessen, Bill C.

A2 - Polk, Donald E.

A2 - Taub, Alan I.

PB - Materials Research Soc

ER -

COMPOSITION DEPENDENCE OF MAGNETIC SHIELDING PROPERTIES FOR AMORPHOUS RIBBONS (FeNi)//7//8Mo//4 B//1//7 Si.

摘要

出版系列

存取文件

其它文件與鏈接

指紋

引用此