Characterizing fracture parameters of a graphene sheet using atomistic simulation and continuum mechanics

Jia-Lin Tsai*, S. H. Tzeng, Y. J. Tzou

*此作品的通信作者

研究成果: Conference contribution同行評審

摘要

The fracture behavior of a graphene sheet containing a center crack was characterized based on the viewpoints of atomistic simulation and continuum mechanics. Two failure modes, i.e., opening mode (Mode I) and sliding mode (Mode II), were considered by applying remote tensile and shear loading, respectively on the graphene sheet. In the atomistic simulation, the equilibrium configurations of the cracked graphene subjected to applied loadings, before and after the crack extension of 2?a , were determined through molecular dynamics (MD) simulation, from which the potential energy variation and the strain energy release rate of the discrete graphene sheet due to crack extension was then calculated accordingly. It is noted that because of the discrete attribute, there is no stress singularity near the crack tip and thus, the concept of stress intensity factor which is generally employed in the continuum mechanics may not be suitable for modeling the crack behavior in the atomistic structures. For the comparison purpose, the continuum finite element model with the same geometric parameters and material properties as the atomistic graphene sheet was constructed and the corresponding strain energy release rate was calculated from the crack closure method. Results indicated that the strain energy release rates obtained from continuum model exhibit good agreement with those derived from discrete atomistic model. Therefore, it is suggested that the concept of strain energy release rate is an appropriate parameter which can be applicable to both the atomistic model and the continuum model for describing the fracture of covalently bonded graphene sheet.

原文English
主出版物標題24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites
編輯J. W. Gillespie Jr.
發行者DEStech Publications
頁面731-743
頁數13
ISBN(列印)9781615676033
出版狀態Published - 15 9月 2009
事件24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites - Newark, DE, United States
持續時間: 15 9月 200917 9月 2009

出版系列

名字24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites
1

Conference

Conference24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites
國家/地區United States
城市Newark, DE
期間15/09/0917/09/09

指紋

深入研究「Characterizing fracture parameters of a graphene sheet using atomistic simulation and continuum mechanics」主題。共同形成了獨特的指紋。

引用此