Carbofuran degradation by the application of MW-assisted H2O2 process

Neelancherry Remya, Jih-Gaw Lin*


研究成果: Article同行評審

18 引文 斯高帕斯(Scopus)


Carbofuran removal performance of a microwave (MW)-assisted H2O2 system under different MW-power levels (300-900 W) was investigated. Batch experiments were conducted at 100 mg/L carbofuran concentration using a modified-MW reactor with 2450 MHz of fixed frequency. As a precursor, control experiments were carried out with H2O2 alone, MW alone and conventional heating (CH). A maximum carbofuran removal of 14% was observed in both H2O2 alone and CH systems. On the other hand, only 2% removal was observed in the MW alone system irrespective of the operation-mode, i.e. continuous or pulsed. The combination of MW and H2O2 produced 100% carbofuran removal in all the MW-assisted experiments. The MW-assisted system operated under continuous-mode and at 750 W has showed rapid carbofuran degradation, i.e. 30 sec, with the highest first-order removal rate constant of 25.82/min. However, 97% carbon oxygen demand (COD) removal was observed in the same system only after 30 min. On the other hand, 100% carbofuran removal and 49% COD removal were observed in the pulsed-mode MW-assisted H2O2 system after 10 and 30 min, respectively. Carbofuran mineralization in the system was evidenced by the formation of ammonium and nitrate, and carbofuran intermediates.

頁(從 - 到)350-359
期刊Journal of Environmental Science and Health - Part B Pesticides, Food Contaminants, and Agricultural Wastes
出版狀態Published - 1 5月 2011


深入研究「Carbofuran degradation by the application of MW-assisted H2O2 process」主題。共同形成了獨特的指紋。