An active guarding circuit design for wideband substrate noise suppression

Hao Ming Chao*, Wen Shen Wuen, Kuei-Ann Wen

*此作品的通信作者

    研究成果: Article同行評審

    7 引文 斯高帕斯(Scopus)

    摘要

    In this paper, an active guarding circuit is presented for wideband substrate noise suppression. A feed-forward compensation mechanism is proposed to extend the noise suppression bandwidth and to adjust the amplitude of phase-inversed noise cancellation current by introducing a zero and an amplitude controller. A noise decoupling mechanism is developed to provide a decoupling path and to sense the noise level for generating noise cancellation current. With substrate characterization, parameters of substrate network impedance, decoupling factor, and amplitude of noise cancellation current can be either obtained or determined. The active guarding circuit is implemented in a 90-nm CMOS process based on substrate characterization. The measured substrate noise suppression is better than -9 dB from dc to 250 MHz. The -3-dB suppression bandwidth is effectively extended to 1.2 GHz. The power consumption and circuit area are 2.5 mW and 20 μm × 41 μm, respectively.

    原文English
    文章編號4655627
    頁(從 - 到)2609-2619
    頁數11
    期刊IEEE Transactions on Microwave Theory and Techniques
    56
    發行號11
    DOIs
    出版狀態Published - 1 11月 2008

    指紋

    深入研究「An active guarding circuit design for wideband substrate noise suppression」主題。共同形成了獨特的指紋。

    引用此