A Redistributable Capacitive Power Converter for Indoor Light-Powered Batteryless IoT Devices

Hao Chung Cheng, Po Han Chen, Yu Tong Su, Po-Hung Chen

研究成果: Article同行評審

4 引文 斯高帕斯(Scopus)

摘要

This paper presents a redistributable capacitive power converter for batteryless optically-powered Internet-of-Things (IoT) devices. The proposed converter employs redistributable two-stage charge pump along with a storage capacitor to power milli-watt order low-power RF power amplifier occasionally using indoor light illumination. The first stage tracks the maximum power point of PV cell and stores the energy to the storage capacitor. The second stage further boosts the output to 1.5 V with voltage regulation. The proposed capacitive converter is composed of 16 1.5×/2× reconfigurable charge pump submodules and a digital low dropout regulator (DLDO) to adapt 0.45 to 0.9 V PV input with high efficiency. The submodules are redistributed among two stages according to operating mode to reduce 46.7% on-chip capacitors. The proposed capacitive power converter is fabricated in 0.18 μm CMOS process. The measured results demonstrate the peak power conversion efficiency is 91%, 63.8%, and 68.5% under 1×, 1.5×, and 2× conversion ratios, respectively.

原文English
文章編號9178725
頁(從 - 到)350-353
頁數4
期刊IEEE Solid-State Circuits Letters
3
DOIs
出版狀態Published - 2020

指紋

深入研究「A Redistributable Capacitive Power Converter for Indoor Light-Powered Batteryless IoT Devices」主題。共同形成了獨特的指紋。

引用此