A Dual-Mode Readout Circuit for SPAD Imaging Applications

Hsi Hao Huang*, Tzu Yun Huang, Chun Hsien Liu, Sheng Di Lin, Chen Yi Lee

*此作品的通信作者

研究成果: Article同行評審

摘要

CMOS single-photon avalanche diodes (SPADs) have recently emerged as promising components in various high-detection-rate imaging applications, including low-light imaging and light-detection and ranging (LiDAR). To reduce the dead time and enhance the timing resolution, each SPAD is equipped with a passive quenching active reset (PQAR) circuit, which includes a logic control circuit for self-restoration. Then a readout tree (RT) circuit is included to accommodate different imaging requirements. The RT circuit introduces two operating modes: single-hit mode and multi-hit mode, enabling pre-processing of the photon-induced signals to meet diverse imaging requirements. A test chip with an effective 1×64 pixels has been designed and fabricated. Measurement results show a reduction in the jitter of the photon-induced signal width of the PQAR circuit to 29.5 ps. Furthermore, a decrease in the dark count rate (DCR) to 0.53 cps/µm2 for the multi-hit mode and an improvement in the photon detection efficiency (PDE) to 9.96% for the single-hit mode has been demonstrated.

原文English
頁(從 - 到)1879-1883
頁數5
期刊IEEE Transactions on Circuits and Systems I: Regular Papers
71
發行號4
DOIs
出版狀態Published - 4月 2024

指紋

深入研究「A Dual-Mode Readout Circuit for SPAD Imaging Applications」主題。共同形成了獨特的指紋。

引用此