張 永佳

研究成果

每年研究成果 2004 2009 2010 2011 2013 2014 2022

• 47 Article
• 6 Conference contribution
• 2 Comment/debate

每年研究成果

每年研究成果

搜尋結果

• 2022

  A Novel Multicategory Defect Detection Method Based on the Convolutional Neural Network Method for TFT-LCD Panels

  Chang, Y. C., Chang, K. H., Meng, H. M. & Chiu, H. C., 2022, 於: Mathematical Problems in Engineering. 2022, 6505372.

  研究成果: Article › 同行評審

  開啟存取

  • Thin-film Transistor 100%
  • Liquid Crystal Display 89%
  • Defect Detection 88%
  • Thin film transistors 61%
  • Liquid crystal displays 52%
  4 引文 斯高帕斯（Scopus）

• Application of a Non-Dominated Sorting Genetic Algorithm to Solve a Bi-Objective Scheduling Problem regarding Printed Circuit Boards

  Chang, Y. C., Chang, K. H. & Zheng, C. P., 1 7月 2022, 於: Mathematics. 10, 13, 2305.

  研究成果: Article › 同行評審

  開啟存取

  • Printed Circuit Board 100%
  • Sorting algorithm 87%
  • Genetic Algorithm 65%
  • Scheduling Problem 61%
  • Printed circuit boards 60%
  2 引文 斯高帕斯（Scopus）
• 2021

  OEE improvement by pogo pin defect detection in wafer probing process

  Yeo, W., Chang, Y-C. & Liu, W., 8月 2021, 於: Microsystem Technologies. 27, 8, p. 3111–3123 13 p.

  研究成果: Article › 同行評審

  • wafers 100%
  • Defects 91%
  • defects 73%
  • downtime 61%
  • Reaction Yield 54%
• 2020

  A novel fuzzy credit risk assessment decision support system based on the python web framework

  Chang, Y. C., Chang, K. H. & Huang, Y. H., 3 7月 2020, 於: Journal of Industrial and Production Engineering. 37, 5, p. 229-244 16 p.

  研究成果: Article › 同行評審

  • Decision support systems 100%
  • Risk assessment 94%
  • Classifiers 22%
  • Sampling 22%
  • Logistic regression 18%
  5 引文 斯高帕斯（Scopus）
• 2018

  A novel network simulation software for supply chain management courses

  Chang, Y-C., Chang, K. H. & Lu, M. T., 1 1月 2018, 於: International Journal of Industrial Engineering : Theory Applications and Practice. 25, 2, p. 230-251 22 p.

  研究成果: Article › 同行評審

  • Supply chain management 100%
  • Supply chains 78%
  • Students 59%
  • Teaching 35%
  • Logistics 24%
  1 引文 斯高帕斯（Scopus）

• Application of eXtreme gradient boosting trees in the construction of credit risk assessment models for financial institutions

  Chang, Y-C., Chang, K. H. & Wu, G. J., 1 12月 2018, 於: Applied Soft Computing Journal. 73, p. 914-920 7 p.

  研究成果: Article › 同行評審

  • Risk assessment 100%
  • Classifiers 72%
  • Logistic regression 28%
  • Support vector machines 20%
  • Sampling 17%
  117 引文 斯高帕斯（Scopus）

• Using exponentially weighted moving average to improve buffer adjustment of demand-driven replenishment strategies

  Chang, Y-C., Chang, K. H., Lee, M. C. & Tsao, K. H., 21 6月 2018, 於: Journal of Testing and Evaluation. 47, 1, p. 602-626 25 p.

  研究成果: Article › 同行評審

  • Buffer Solution 100%
  • Foundry 54%
  • Supply chain management 38%
  • Foundries 35%
  • Quality Control 35%
  1 引文 斯高帕斯（Scopus）
• 2017

  Applying theory of constraints-based approach to solve memory allocation of cloud storage

  Chang, K. H., Chang, Y-C. & Chang, Y. S., 2 10月 2017, 於: International Journal of Systems Science: Operations and Logistics. 4, 4, p. 311-329 19 p.

  研究成果: Article › 同行評審

  • Storage allocation (computer) 100%
  • Theory of Constraints 92%
  • Data storage equipment 43%
  • Buffer Management 33%
  • Demand-pull 28%
  2 引文 斯高帕斯（Scopus）

• EZ-Net BYOD service management in campus wireless networks

  Kao, Y-C., Chang, Y-C. & Chang, R. S., 1 1月 2017, 於: Journal of Internet Technology. 18, 4, p. 907-917 11 p.

  研究成果: Article › 同行評審

  • Wireless networks 100%
  • Authentication 65%
  • Wireless local area networks (WLAN) 24%
  • Servers 18%
  • Controllers 13%
  2 引文 斯高帕斯（Scopus）

• Using dual response surface methodology as a benchmark to process multi-class imbalanced data

  Tong, L-I., Chang, K. H., Wu, P. Y. & Chang, Y-C., 17 2月 2017, 於: Journal of Industrial and Production Engineering. 34, 2, p. 147-158 12 p.

  研究成果: Article › 同行評審

  • Logistic regression 100%
  • Regression analysis 92%
  • Sampling 63%
  • Experiments 31%
  1 引文 斯高帕斯（Scopus）
• 2016

  Applied variable neighborhood search-based approach to solve two-stage supply chain scheduling problems

  Chang, Y-C., Chang, K. H. & Kang, T. C., 1 5月 2016, 於: Journal of Testing and Evaluation. 44, 3, p. 1337-1349 13 p.

  研究成果: Article › 同行評審

  • Supply chains 100%
  • Scheduling 69%
  • Buffer Solution 65%
  • Probe 62%
  • Time 36%
  5 引文 斯高帕斯（Scopus）

• Establishing decision tree-based short-term default credit risk assessment models

  Chang, Y-C., Chang, K. H., Chu, H. H. & Tong, L-I., 1 12月 2016, 於: Communications in Statistics - Theory and Methods. 45, 23, p. 6803-6815 13 p.

  研究成果: Article › 同行評審

  • Default Risk 100%
  • Credit Risk 83%
  • Risk Assessment 78%
  • Decision tree 73%
  • Cox Proportional Hazards Model 32%
  17 引文 斯高帕斯（Scopus）

• Integrating soft set theory and fuzzy linguistic model to evaluate the performance of training simulation systems

  Chang, K. H., Chang, Y-C., Chain, K. & Chung, H. Y., 1 9月 2016, 於: PLoS ONE. 11, 9, e0162092.

  研究成果: Article › 同行評審

  開啟存取

  • fuzzy logic 100%
  • Simulation Training 96%
  • Linguistics 80%
  • Simulation 45%
  • graphs 26%
  13 引文 斯高帕斯（Scopus）
• 2015

  A novel AHP-based benefit evaluation model of military simulation training systems

  Chang, K. H., Chang, Y-C. & Chung, H. Y., 23 2月 2015, 於: Mathematical Problems in Engineering. 2015, 956757.

  研究成果: Article › 同行評審

  開啟存取

  • Simulation Training 100%
  • Evaluation Model 79%
  • Analytic Hierarchy Process 69%
  • Military 63%
  • Analytic hierarchy process 52%
  18 引文 斯高帕斯（Scopus）

• Enhancement of inventory management for the wafer manufacturing industry by combining market demand forecast and demand-pull replenishment

  Chang, Y-C., Chang, K. H. & Sun, W. C., 1 7月 2015, 於: Journal of Testing and Evaluation. 43, 4, p. 948-963 16 p.

  研究成果: Article › 同行評審

  • Semiconductor materials 100%
  • Semiconductor 85%
  • Industry 83%
  • Foundry 53%
  • Foundries 43%
  5 引文 斯高帕斯（Scopus）
• 2014

  An ant colony optimization heuristic for an integrated production and distribution scheduling problem

  Chang, Y-C., Li, V. C. & Chiang, C. J., 3 4月 2014, 於: Engineering Optimization. 46, 4, p. 503-520 18 p.

  研究成果: Article › 同行評審

  • Production/scheduling 100%
  • Ant Colony Optimization 92%
  • Integrated Production 80%
  • Ant colony optimization 69%
  • Scheduling Problem 64%
  54 引文 斯高帕斯（Scopus）

• An enhanced model for SDBR in a random reentrant flow shop environment

  Chang, Y-C. & Huang, W. T., 19 3月 2014, 於: International Journal of Production Research. 52, 6, p. 1808-1826 19 p.

  研究成果: Article › 同行評審

  • Drum-buffer-rope 100%
  • Flow Shop 75%
  • Machine Breakdown 57%
  • Dispatching Rules 54%
  • Due Dates 44%
  10 引文 斯高帕斯（Scopus）

• A novel credit risk assessment model using a granular computing technique

  Chang, Y-C., Chang, K. H. & Hsiao, C. W., 1 11月 2014, 於: Journal of Testing and Evaluation. 42, 6

  研究成果: Article › 同行評審

  • Granular computing 100%
  • Risk Assessment 84%
  • Risk assessment 67%
  • Sampling 22%
  1 引文 斯高帕斯（Scopus）

• Applying the concept of exponential approach to enhance the assessment capability of FMEA

  Chang, K. H., Chang, Y-C. & Lai, P. T., 2 11月 2014, 於: Journal of Intelligent Manufacturing. 25, 6, p. 1413-1427 15 p.

  研究成果: Article › 同行評審

  • Failure modes 100%
  • Risk assessment 8%
  52 引文 斯高帕斯（Scopus）

• Integrate market demand forecast and demand-pull replenishment to improve the inventory management effectiveness of wafer fabrication

  Chang, Y-C., Chang, K. H. & Huang, C. W., 1 1月 2014, 於: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 228, 4, p. 617-636 20 p.

  研究成果: Article › 同行評審

  • Fabrication 100%
  • Integrated circuit design 82%
  • Foundries 77%
  • Supply chains 66%
  • Semiconductor materials 59%
  8 引文 斯高帕斯（Scopus）

• Integrating TOPSIS and DEMATEL methods to rank the risk of failure of FMEA

  Chang, K. H., Chang, Y-C. & Lee, Y. T., 16 11月 2014, 於: International Journal of Information Technology and Decision Making. 13, 6, p. 1229-1257 29 p.

  研究成果: Article › 同行評審

  • Failure modes 100%
  • Decision making 82%
  • Risk analysis 15%
  • Risk assessment 13%
  • Industrial plants 13%
  40 引文 斯高帕斯（Scopus）

• Prioritisation on 5S activities for a semiconductor wafer fabrication: An empirical study

  Chang, Y-C. & Chen, C. Y., 1 1月 2014, 於: International Journal of Quality and Reliability Management. 31, 4, p. 380-394 15 p.

  研究成果: Article › 同行評審

  • Wafer Fabrication 100%
  • Semiconductors 86%
  • Prioritization 70%
  • Check List 44%
  • Empirical Study 41%
  8 引文 斯高帕斯（Scopus）

• Prioritizing 5S activities by Kano model with modified CS coefficient for a Semiconductor wafer fabrication during ramp-up stage

  Chang, Y-C. & Chen, C. Y., 1 1月 2014, 於: TQM Journal. 26, 2, p. 109-124 16 p., 17105747.

  研究成果: Article › 同行評審

  • Wafer Fabrication 100%
  • Kano Model 87%
  • Semiconductors 86%
  • Coefficients 49%
  • Audit 35%
  2 引文 斯高帕斯（Scopus）

• Probe of the replenishment strategy and grouping rule in the semiconductor industry

  Chang, Y-C., Chang, K. H. & Lei, Y. C., 1 1月 2014, 於: Journal of Testing and Evaluation. 42, 2, JTE20120146.

  研究成果: Article › 同行評審

  • Semiconductor materials 100%
  • Semiconductor 85%
  • Industry 83%
  • Buffer Solution 73%
  • Probe 69%
  4 引文 斯高帕斯（Scopus）
• 2013

  Applied column generation-based approach to solve supply chain scheduling problems

  Chang, Y-C., Chang, K. H. & Chang, T. K., 1 7月 2013, 於: International Journal of Production Research. 51, 13, p. 4070-4086 17 p.

  研究成果: Article › 同行評審

  • Column Generation 100%
  • Supply chains 71%
  • Scheduling Problem 65%
  • Scheduling 50%
  • Optimality 46%
  25 引文 斯高帕斯（Scopus）

• Enhancing FMEA assessment by integrating grey relational analysis and the decision making trial and evaluation laboratory approach

  Chang, K. H., Chang, Y-C. & Tsai, I. T., 1 7月 2013, 於: Engineering Failure Analysis. 31, p. 211-224 14 p.

  研究成果: Article › 同行評審

  • Failure modes 100%
  • Decision making 82%
  • Time 40%
  • Liquid crystal displays 24%
  108 引文 斯高帕斯（Scopus）

• Erratum

  hu Chang, K., Chang, Y-C. & Ting Lai, P., 4 1月 2013, 於: International Journal of Quality & Reliability Management. 30, 1

  研究成果: Article › 同行評審

• FMEA-based DEMATEL apportionment approach

  Chang, K. H., Liaw, C. S., Chang, T. Y. & Chang, Y-C., 1 1月 2013, 於: Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology. 42, 1, p. 41-58 18 p.

  研究成果: Article › 同行評審

  • decision making 100%
  • failure modes 90%
  • evaluation 47%
  • system failures 31%
  • life cycle costs 17%
  3 引文 斯高帕斯（Scopus）

• Risk assessment by quantifying and prioritizing 5S activities for semiconductor manufacturing

  Chang, Y-C., Chang, K. H. & Chen, C. Y., 1 12月 2013, 於: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 12, p. 1874-1887 14 p.

  研究成果: Article › 同行評審

  • Risk assessment 100%
  • Semiconductor materials 90%
  • Failure modes 89%
  • Linguistics 48%
  • Fabrication 37%
  8 引文 斯高帕斯（Scopus）

• Self-assessment of an 5S audit in semiconductor manufacturing

  Chang, Y-C., Chen, C. Y. & Chang, K. H., 17 1月 2013, 於: Information Technology Journal. 12, 2, p. 251-263 13 p.

  研究成果: Article › 同行評審

  • Semiconductor materials 100%
  • Failure modes 99%
  • Benchmarking 23%
  • Fabrication 16%
• 2012

  An innovative approach integrating 2-tuple and lowga operators in process failure mode and effects analysis

  Chang, K. H., Chang, Y-C., Wen, T. C. & Cheng, C. H., 1 1月 2012, 於: International Journal of Innovative Computing, Information and Control. 8, 1 B, p. 747-761 15 p.

  研究成果: Article › 同行評審

  • Failure Modes and Effects Analysis 100%
  • Failure modes 45%
  • Operator 23%
  • Linguistics 16%
  • Robustness 12%
  24 引文 斯高帕斯（Scopus）

• Understand customer's needs on 5S audit for wafer manufacturing fabrication

  Chang, Y-C. & Chen, C. Y., 19 11月 2012, 於: ICIC Express Letters. 6, 10, p. 2487-2492 6 p.

  研究成果: Article › 同行評審

  • Labeling 100%
  • Sales 97%
  • Fabrication 75%
  • Industry 44%
• 2011

  A modification of simplified drum-buffer-rope for re-entrant flow shop scheduling

  Chang, Y-C. & Huang, W. T., 1 1月 2011, 於: Information Technology Journal. 10, 1, p. 40-50 11 p.

  研究成果: Article › 同行評審

  開啟存取

  • Reentry 100%
  • Scheduling 58%
  • Industry 37%
  3 引文 斯高帕斯（Scopus）

• Determining the optimal re-sampling strategy for a classification model with imbalanced data using design of experiments and response surface methodologies

  Tong, L-I., Chang, Y-C. & Lin, S. H., 1 4月 2011, 於: Expert Systems with Applications. 38, 4, p. 4222-4227 6 p.

  研究成果: Article › 同行評審

  • Design of experiments 100%
  • Sampling 75%
  • Classifiers 30%
  • Invariance 22%
  • Machine learning 15%
  28 引文 斯高帕斯（Scopus）

• ME-OWA based DEMATEL reliability apportionment method

  Liaw, C. S., Chang, Y-C., Chang, K. H. & Chang, T. Y., 1 8月 2011, 於: Expert Systems with Applications. 38, 8, p. 9713-9723 11 p.

  研究成果: Article › 同行評審

  • Entropy 100%
  • Decision making 86%
  • Computer control 34%
  • Maintainability 33%
  62 引文 斯高帕斯（Scopus）
• 2010

  Applying fuzzy analytic hierarchy process in supplier selection-using handheld GPS as an example

  Chang, Y-C., Wen, T. C. & Chang, K. H., 1 5月 2010, 於: Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology. 39, 1, p. 113-122 10 p.

  研究成果: Article › 同行評審

  • hierarchies 100%
  • decision making 44%
  • economics 36%
  • receivers 27%
  • modules 27%

• Causal model of service quality and customer loyalty for a Chinese medicine clinic by multiple-group analysis

  Chang, Y-C. & Chang, T. M., 15 7月 2010, 於: Journal of Quality. 17, 3, p. 179-206 28 p.

  研究成果: Article › 同行評審

  • Causal Model 100%
  • Medicine 85%
  • Customer Loyalty 80%
  • Quality of Service 72%
  • Quality of service 66%

• Examining the effects of learning motivation and of course design in an instructional simulation game

  Chang, Y-C., Peng, H. Y. & Chao, H. C., 1 12月 2010, 於: Interactive Learning Environments. 18, 4, p. 319-339 21 p.

  研究成果: Article › 同行評審

  • learning motivation 100%
  • simulation 68%
  • Students 64%
  • Teaching 22%
  • student 21%
  43 引文 斯高帕斯（Scopus）
• 2009

  A case study of visual management in TOYOTA manufacturing enterprise

  Tsan-Ming, C., Chang, Y-C. & Jui-Kun, C., 27 4月 2009, 於: Journal of Quality. 16, 1, p. 73-86 14 p.

  研究成果: Article › 同行評審

  • Manufacturing 100%
  • Industry 46%
  • Toyota 41%
  • Competitiveness 34%
  • Production control 33%
  2 引文 斯高帕斯（Scopus）

• A flexible web-based simulation game for production and logistics management courses

  Chang, Y-C., Chen, W-C., Yang, Y. N. & Chao, H. C., 1 8月 2009, 於: Simulation Modelling Practice and Theory. 17, 7, p. 1241-1253 13 p.

  研究成果: Article › 同行評審

  • Production Management 100%
  • Web-based 85%
  • Logistics 57%
  • Game 45%
  • Simulation 35%
  26 引文 斯高帕斯（Scopus）

• An empirical case study on the service quality for traditional Chinese medical clinics

  Chang, Y-C. & Chang, T. M., 1 12月 2009, 於: WSEAS Transactions on Business and Economics. 6, 12, p. 591-604 14 p.

  研究成果: Article › 同行評審

  • Perceived Service Quality 100%
  • Traditional Chinese Medicine 98%
  • Service Quality 82%
  • Questionnaire 76%
  • Quality of Service 36%
  1 引文 斯高帕斯（Scopus）

• Innovative reliability allocation using the maximal entropy ordered weighted averaging method

  Chang, Y-C., Chang, K. H. & Liaw, C. S., 1 11月 2009, 於: Computers and Industrial Engineering. 57, 4, p. 1274-1281 8 p.

  研究成果: Article › 同行評審

  • Entropy 100%
  • Aircraft radar equipment 41%
  • Radar 23%
  • Defects 20%
  74 引文 斯高帕斯（Scopus）

• Reprioritization of failures in a silane supply system using an intuitionistic fuzzy set ranking technique

  Chang, K. H., Cheng, C. H. & Chang, Y-C., 27 2月 2009, 於: Soft Computing. 14, 3, p. 285-298 14 p.

  研究成果: Article › 同行評審

  • Silanes 100%
  • Intuitionistic Fuzzy Set 93%
  • Fuzzy sets 82%
  • Ranking 79%
  • Failure Mode 52%
  57 引文 斯高帕斯（Scopus）

• The establishment of project management model for defense industry

  Chang, Y-C., Chen, C. P. & Chao, H. C., 4 3月 2009, 於: Chung Cheng Ling Hsueh Pao/Journal of Chung Cheng Institute of Technology. 37, 1, p. 117-129 13 p.

  研究成果: Article › 同行評審

  • defense industry 100%
  • project management 92%
  • project planning 15%
  • causes 5%
• 2008

  Reliability assessment of an aircraft propulsion system using IFS and OWA tree

  Chang, K. H., Cheng, C. H. & Chang, Y-C., 1 10月 2008, 於: Engineering Optimization. 40, 10, p. 907-921 15 p.

  研究成果: Article › 同行評審

  • Reliability Assessment 100%
  • Aircraft propulsion 93%
  • System Reliability 83%
  • Failure Probability 83%
  • Aircraft 76%
  40 引文 斯高帕斯（Scopus）
• 2006

  Dispatching in semiconductor fabs with machine-dedication features

  Wu, M-C., Huang, Y. L., Chang, Y-C. & Yang, K. F., 1 4月 2006, 於: International Journal of Advanced Manufacturing Technology. 28, 9, p. 978-984 7 p.

  研究成果: Article › 同行評審

  • Semiconductor materials 100%
  • Throughput 17%
  • Flow rate 9%
  8 引文 斯高帕斯（Scopus）
• 2004

  Machine scheduling with job delivery coordination

  Chang, Y-C. & Lee, C. Y., 16 10月 2004, 於: European Journal of Operational Research. 158, 2, p. 470-487 18 p.

  研究成果: Article › 同行評審

  • Machine Scheduling 100%
  • Heuristics 61%
  • Customers 54%
  • Scheduling 48%
  • Single Machine 44%
  218 引文 斯高帕斯（Scopus）