Shyh-Yuan Lee

2022

Alterations in kinematics of temporomandibular joint associated with chronic neck pain

Siu, W. S., Shih, Y. F., Lee, S. Y., Hsu, C. Y., Wei, M. J., Wang, T. J., Lin, H. C. & Lin, Y. L., 2022, (Accepted/In press) 於: Journal of Oral Rehabilitation.

研究成果: Article › 同行評審

Evaluation of students' self-assessment performance in preclinical endodontic training by means of rubrics and a 3D printed model

Tsai, S. T., Ho, Y. C., Tsai, C. L., Yang, S. F., Lai, Y. L. & Lee, S. Y., 11月 2022, 於: Journal of the Formosan Medical Association. 121, 11, p. 2203-2210 8 p.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Multiresin Additive Manufacturing Process for Printing a Complete Denture and an Analysis of Accuracy

Jiang, C. P., Hentihu, M. F. R., Lee, S. Y. & Lin, R., 1 12月 2022, 於: 3D Printing and Additive Manufacturing. 9, 6, p. 511-519 9 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation

Jiang, C. P., Cheng, Y. C., Lin, H. W., Chang, Y. L., Pasang, T. & Lee, S. Y., 2022, (Accepted/In press) 於: Rapid Prototyping Journal.

研究成果: Article › 同行評審

18 引文斯高帕斯（Scopus）

2021

Biofabrication of cell-laden gelatin methacryloyl hydrogels with incorporation of silanized hydroxyapatite by visible light projection

Su, J. J. M., Lin, C. H., Chen, H., Lee, S. Y. & Lin, Y. M., 2 7月 2021, 於: Polymers. 13, 14, 2354.

研究成果: Article › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Periodontal conditions in patients with Sjögren's syndrome: A meta-analysis

Wu, S. Y., Wu, C. Y., Chen, M. H., Huang, H. Y., Chen, Y. H., Tsao, Y. P., Lai, Y. L. & Lee, S. Y., 10月 2021, 於: Journal of Dental Sciences. 16, 4, p. 1222-1232 11 p.

研究成果: Article › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

2020

Development of polycaprolactone/hydroxyapatite composite resin for 405 nm digital light projection 3D printing

Lin, Y. M., Chen, H., Lin, C. H., Huang, P. J. & Lee, S. Y., 19 5月 2020, 於: Rapid Prototyping Journal. 26, 5, p. 951-958 8 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA

Lin, C. H., Lin, Y. M., Lai, Y. L. & Lee, S. Y., 2月 2020, 於: Journal of Prosthetic Dentistry. 123, 2, p. 349-354 6 p.

研究成果: Article › 同行評審

75 引文斯高帕斯（Scopus）

Risk assessment of interproximal contact loss between implant-supported fixed prostheses and adjacent teeth: A retrospective radiographic study

Yen, J. Y., Kang, L., Chou, I. C., Lai, Y. L. & Lee, S. Y., 2020, (Accepted/In press) 於: Journal of Prosthetic Dentistry.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Synthesis and formulation of PCL-Based Urethane acrylates for DLP 3D printers

Chen, H., Lee, S. Y. & Lin, Y. M., 1 7月 2020, 於: Polymers. 12, 7, p. 1-17 17 p., 1500.

研究成果: Article › 同行評審

開啟存取

31 引文斯高帕斯（Scopus）

2019

A comparison of the marginal fit and mechanical properties of a zirconia dental crown using CAM and 3DSP

Hsu, H. J., Lee, S. Y., Jiang, C. P. & Lin, R., 30 8月 2019, 於: Rapid Prototyping Journal. 25, 7, p. 1187-1197 11 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Interactive OCT-based tooth scan and reconstruction

Lai, Y. C., Lin, J. Y., Yao, C. Y., Lyu, D. Y., Lee, S. Y., Chen, K. W. & Chen, I. Y., 1 10月 2019, 於: Sensors (Switzerland). 19, 19, 4234.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

OCT-based periodontal inspection framework

Lai, Y. C., Chiu, C. H., Cai, Z. Q., Lin, J. Y., Yao, C. Y., Lyu, D. Y., Lee, S. Y., Chen, K. W. & Chen, I. Y., 2 12月 2019, 於: Sensors (Switzerland). 19, 24, 5496.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Optical polarimetric detection for dental hard tissue diseases characterization

Hsiao, T. Y., Lee, S. Y. & Sun, C. W., 11月 2019, 於: Sensors (Switzerland). 19, 22, 4971.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

2018

Automated segmentation of dental calculus in optical coherence tomography images

Lee, C. Y., Chuang, C. C., Chen, G. J., Huang, C. C., Lee, S. Y. & Lin, Y. H., 1 1月 2018, 於: Sensors and Materials. 30, 11, p. 2517-2529 13 p.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Effects of titanium dioxide and tartrazine lake on Z-axis resolution and physical properties of resins printed by visible-light 3D printers

Chang, W. T., Hsu, H. J., Jiang, C. P., Lee, S. Y. & Lin, Y. M., 2018, 於: Rapid Prototyping Journal. 24, 1, p. 160-165 6 p.

研究成果: Article › 同行評審

6 引文斯高帕斯（Scopus）

Human Beta-Defensin-2 and -3 Mitigate the Negative Effects of Bacterial Contamination on Bone Healing in Rat Calvarial Defect

Lee, P. H., Chen, M. Y., Lai, Y. L., Lee, S. Y. & Chen, H. L., 4月 2018, 於: Tissue Engineering - Part A. 24, 7-8, p. 653-661 9 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Parathyroid hormone gene-activated matrix with DFDBA/collagen composite matrix enhances bone regeneration in rat calvarial bone defects

Lee, P. H., Yew, T. L., Lai, Y. L., Lee, S. Y. & Chen, H. L., 8月 2018, 於: Journal of the Chinese Medical Association. 81, 8, p. 699-707 9 p.

研究成果: Article › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Stiffness modification of photopolymerizable gelatin-methacrylate hydrogels influences endothelial differentiation of human mesenchymal stem cells

Lin, C. H., Su, J. J. M., Lee, S. Y. & Lin, Y. M., 10月 2018, 於: Journal of Tissue Engineering and Regenerative Medicine. 12, 10, p. 2099-2111 13 p.

研究成果: Article › 同行評審

44 引文斯高帕斯（Scopus）

Synthesis, Characterization, and Visible Light Curing Capacity of Polycaprolactone Acrylate

Tzeng, J. J., Hsiao, Y. T., Wu, Y. C., Chen, H., Lee, S. Y. & Lin, Y. M., 2018, 於: BioMed Research International. 2018, 8719624.

研究成果: Article › 同行評審

開啟存取

12 引文斯高帕斯（Scopus）

Synthesis and Characterization of Polycaprolactone-Based Polyurethanes for the Fabrication of Elastic Guided Bone Regeneration Membrane

Lee, S. Y., Wu, S. C., Chen, H., Tsai, L. L., Tzeng, J. J., Lin, C. H. & Lin, Y. M., 2018, 於: BioMed Research International. 2018, 3240571.

研究成果: Article › 同行評審

開啟存取

29 引文斯高帕斯（Scopus）

Technical development of multi-resin three-dimensional printer using bottom-up method

Hsu, H. J., Lee, S. Y. & Jiang, C. P., 2018, 於: International Journal of Automation and Smart Technology. 8, 4, p. 173-178 6 p.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

修格蘭氏症候群患者的口腔照護

吳詩韻, 陳明翰, 曹彥博 & Lee, S-Y., 27 7月 2018, 於: 臨床醫學月刊. 82, 1, p. 421-424 4 p.

研究成果: Article › 同行評審

2017

Bioactive surface modification of polycaprolactone using MG63-conditioned medium can induce osteogenic differentiation of mesenchymal stem cells

Lin, C. H., Chang, M. C., Hung, S. C., Lee, S. Y. & Lin, Y. M., 1 4月 2017, 於: Journal of Materials Science. 52, 7, p. 3967-3978 12 p.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

Influence of sinus floor configuration on grafted bone remodeling after osteotome sinus floor elevation

Chen, H. H., Lin, Y. C., Lee, S. Y., Chang, L. Y., Chen, B. J. & Lai, Y. L., 1月 2017, 於: Journal of Periodontology. 88, 1, p. 10-16 7 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Shrinkage prediction using finite element analysis and experimental validation using three-dimension slurry printing system

Hsu, H. J., Lee, S. Y., Chang, S. L., Lo, C. H. & Lin, Y. M., 1 7月 2017, 於: International Journal of Advanced Manufacturing Technology. 91, 1-4, p. 1289-1296 8 p.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

2016

Antioxidant N-Acetylcysteine and Glutathione Increase the Viability and Proliferation of MG63 Cells Encapsulated in the Gelatin Methacrylate/VA-086/Blue Light Hydrogel System

Lin, C. H., Lin, K. F., Mar, K., Lee, S. Y. & Lin, Y. M., 1 8月 2016, 於: Tissue Engineering - Part C: Methods. 22, 8, p. 792-800 9 p.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

Plasma treatment in conjunction with EGM-2 medium increases endothelial and osteogenic marker expressions of bone marrow mesenchymal stem cells

Lin, C. H., Lee, S. Y. & Lin, Y. M., 1 10月 2016, 於: Journal of Materials Science. 51, 19, p. 9145-9154 10 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

2015

Design improvement and dynamic finite element analysis of novel ITI dental implant under dynamic chewing loads

Cheng, Y. C., Lin, D. H., Jiang, C. P. & Lee, S. Y., 2015, 於: Bio-Medical Materials and Engineering. 26, p. S555-S561

研究成果: Article › 同行評審

開啟存取

11 引文斯高帕斯（Scopus）

Development of a three-dimensional slurry printing system using dynamic mask projection for fabricating zirconia dental implants

Lee, S. Y. & Jiang, C. P., 2 12月 2015, 於: Materials and Manufacturing Processes. 30, 12, p. 1498-1504 7 p.

研究成果: Article › 同行評審

23 引文斯高帕斯（Scopus）

Sensing of tooth microleakage based on dental optical coherence tomography

Sun, C. W., Ho, Y. C. & Lee, S. Y., 1 1月 2015, 於: Journal of Sensors. 2015, 984627.

研究成果: Article › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Treatment of large apical lesions with mucosal fenestration: A clinical study with long-term evaluation

Lin, Y. C., Lee, Y. Y., Ho, Y. C., Hsieh, Y. C., Lai, Y. L. & Lee, S. Y., 2015, 於: Journal of Endodontics. 41, 4, p. 563-567 5 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

2014

Development of mask-less projection slurry stereolithography for the fabrication of zirconia dental coping

Jiang, C. P., Hsu, H. J. & Lee, S. Y., 28 11月 2014, 於: International Journal of Precision Engineering and Manufacturing. 15, 11, p. 2413-2419 7 p.

研究成果: Article › 同行評審

26 引文斯高帕斯（Scopus）

Effects of implant neck design on primary stability and overload in a type IV mandibular bone

Chou, I. C., Lee, S. Y. & Jiang, C. P., 1 11月 2014, 於: International Journal for Numerical Methods in Biomedical Engineering. 30, 11, p. 1223-1237 15 p.

研究成果: Article › 同行評審

15 引文斯高帕斯（Scopus）

Evaluation physical characteristics and comparison antimicrobial and anti-inflammation potentials of dental root canal sealers containing hinokitiol in vitro

Shih, Y. H., Lin, D. J., Chang, K. W., Hsia, S. M., Ko, S. Y., Lee, S. Y., Hsue, S. S., Wang, T. H., Chen, Y. L. & Shieh, T. M., 10 6月 2014, 於: PLoS ONE. 9, 6, e94941.

研究成果: Article › 同行評審

開啟存取

45 引文斯高帕斯（Scopus）

Finite Element Analysis of Dental Implant Neck Effects on Primary Stability and Osseointegration in a Type IV Bone Mandible

Huang, Y. M., Chou, I. C., Jiang, C. P., Wu, Y. S. & Lee, S. Y., 2014, 於: Bio-Medical Materials and Engineering. 24, 1, p. 1407-1415 9 p.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

Finite element modelling of implant designs and cortical bone thickness on stress distribution in maxillary type IV bone

I-Chiang, C., Shyh-Yuan, L., Ming-Chang, W., Sun, C. W. & Jiang, C. P., 1 1月 2014, 於: Computer Methods in Biomechanics and Biomedical Engineering. 17, 5, p. 516-526 11 p.

研究成果: Article › 同行評審

37 引文斯高帕斯（Scopus）

Interdisciplinary approach for treating a large through-and-through periapical defect using guided tissue regeneration: a case report

Lin, G. H., Chang, L. Y., Lin, W. C., Lee, S. Y. & Lai, Y. L., 1 1月 2014, 於: International Journal of Periodontics and Restorative Dentistry. 34, 1, p. e1-e8

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Review: Optical scanning probe for optical coherence tomography

Sun, C. W., Lee, S. Y. & Lin, K. F., 1 1月 2014, 於: Journal of Medical and Biological Engineering. 34, 2, p. 95-100 6 p.

研究成果: Article › 同行評審

12 引文斯高帕斯（Scopus）

2013

A noncontact resonance frequency detection technique for the assessment of the interfacial bone defect around a dental implant

Pan, M. C., Zhuang, H. B., Chen, C. S., Wu, J. W. & Lee, S. Y., 12月 2013, 於: Medical Engineering and Physics. 35, 12, p. 1825-1830 6 p.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

Functional dissociation within insular cortex: The effect of pre-stimulus anxiety on pain

Lin, C. S., Hsieh, J. C., Yeh, T. C., Lee, S. Y. & Niddam, D. M., 1 2月 2013, 於: Brain Research. 1493, p. 40-47 8 p.

研究成果: Article › 同行評審

31 引文斯高帕斯（Scopus）

Non-contact vibro-acoustic detection technique for dental osseointegration examination

Zhuang, H. B., Tu, W. S., Pan, M. C., Wu, J. W., Chen, C. S., Lee, S. Y. & Yang, Y. C., 2013, 於: Journal of Medical and Biological Engineering. 33, 1, p. 35-44 10 p.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

2012

Characterization of tooth structure and the dentin-enamel zone based on the Stokes-Mueller calculation

Sun, C. W., Hsieh, Y. S., Ho, Y. C., Jiang, C. P., Chuang, C. C. & Lee, S. Y., 1 11月 2012, 於: Journal of Biomedical Optics. 17, 11, 116026.

研究成果: Article › 同行評審

3 引文斯高帕斯（Scopus）

Esthetic periodontal surgery for impacted dilacerated maxillary central incisors

Wei, Y. J., Lin, Y. C., Kaung, S. S., Yang, S. F., Lee, S. Y. & Lai, Y. L., 10月 2012, 於: American Journal of Orthodontics and Dentofacial Orthopedics. 142, 4, p. 546-551 6 p.

研究成果: Article › 同行評審

14 引文斯高帕斯（Scopus）

2011

Characteristics of subgingival calculus detection by multiphoton fluorescence microscopy

Tung, O. H., Lee, S. Y., Lai, Y. L. & Chen, H. F., 6月 2011, 於: Journal of Biomedical Optics. 16, 6, 066017.

研究成果: Article › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Development of digital shade guides for color assessment using a digital camera with ring flashes

Tung, O. H., Lai, Y. L., Ho, Y. C., Chou, I. C. & Lee, S. Y., 2月 2011, 於: Clinical Oral Investigations. 15, 1, p. 49-56 8 p.

研究成果: Article › 同行評審

21 引文斯高帕斯（Scopus）

Effects of light attenuation by fibre posts on polymerization of a dual-cured resin cement and microleakage of post-restored teeth

Ho, Y. C., Lai, Y. L., Chou, I. C., Yang, S. F. & Lee, S. Y., 4月 2011, 於: Journal of Dentistry. 39, 4, p. 309-315 7 p.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

Intramarrow bone morphogenetic protein 4 gene delivery enhances early implant stability in femurs of ovariectomized rabbits

Lai, Y. L., Kuo, N. C., Hsiao, W. K., Yew, T. L., Lee, S. Y. & Chen, H. L., 7月 2011, 於: Journal of Periodontology. 82, 7, p. 1043-1050 8 p.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Intramarrow bone morphogenetic protein 4 gene delivery improves local bone quality in femurs of ovariectomized rabbits

Hsiao, W. K., Yew, T. L., Lai, Y. L., Lee, S. Y. & Chen, H. L., 6月 2011, 於: Journal of Periodontology. 82, 6, p. 854-862 9 p.

研究成果: Article › 同行評審

4 引文斯高帕斯（Scopus）

Subgingival calculus imaging based on swept-source optical coherence tomography

Hsieh, Y. S., Ho, Y. C., Lee, S. Y., Lu, C. W., Jiang, C. P., Jiang, C. C., Wang, C. Y. & Suna, C. W., 1 7月 2011, 於: Journal of Biomedical Optics. 16, 7, 071409.

研究成果: Article › 同行評審

29 引文斯高帕斯（Scopus）

李 士元

研究成果

搜尋結果

李士元