E-Wen Huang

2023

Effect of Porosity and Heat Treatment on Mechanical Properties of Additive Manufactured CoCrMo Alloys

Lam, T. N., Chen, K. M., Tsai, C. H., Tsai, P. I., Wu, M. H., Hsu, C. C., Jain, J. & Huang, E. W., 1月 2023, 於: Materials. 16, 2, 751.

研究成果: Article › 同行評審

開啟存取

Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy

Lam, T. N., Chin, H. H., Zhang, X., Feng, R., Wang, H., Chiang, C. Y., Lee, S. Y., Kawasaki, T., Harjo, S., Liaw, P. K., Yeh, A. C., Chung, T. F. & Huang, E. W., 15 2月 2023, 於: Acta Materialia. 245, 118585.

研究成果: Article › 同行評審

2022

Bimetallic additively manufactured structure (BAMS) of Inconel 625 and austenitic stainless steel: effect of heat-treatment on microstructure and mechanical properties

Kim, Y. S., Yun, D., Han, J. H., Ahsan, M. R. U., Huang, E. W., Jain, J., Ji, C., Kim, D. B. & Lee, S. Y., 8月 2022, 於: International Journal of Advanced Manufacturing Technology. 121, 11-12, p. 7539-7549 11 p.

研究成果: Article › 同行評審

Diffraction-based Residual Stress Mapping of a Stress Frame of Gray Iron via Vibratory Stress Relief Method

Chen, S. W., Huang, E. W., Chiu, S. M., Reid, M., Wu, C. Y., Paradowska, A. M., Lam, T. N., Wu, Y. H., Lee, S. Y., Lu, S. C., Chen, S. A., Lin, Y. G. & Weng, S. C., 7 4月 2022, 於: Frontiers in Materials. 9, 859342.

研究成果: Article › 同行評審

開啟存取

Estimating fine melt pool, coarse melt pool, and heat affected zone effects on the strengths of additive manufactured AlSi10Mg alloys

Lam, T. N., Lee, A., Chiu, Y. R., Kuo, H. F., Kawasaki, T., Harjo, S., Jain, J., Lee, S. Y. & Huang, E. W., 20 10月 2022, 於: Materials Science and Engineering A. 856, 143961.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Evaluation of Supercritical Carbon Dioxide Corrosion by High Temperature Oxidation Experiments and Machine Learning Models

Chae, H., Seo, S., Jung, Y. C., Huang, E. W., Jain, J., Han, J. H. & Lee, S. Y., 7月 2022, 於: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 53, 7, p. 2614-2626 13 p.

研究成果: Article › 同行評審

Grain-size-dependent microstructure effects on cyclic deformation mechanisms in CoCrFeMnNi high-entropy-alloys

Luo, M. Y., Lam, T. N., Wang, P. T., Tsou, N-T., Chang, Y. J., Feng, R., Kawasaki, T., Harjo, S., Liaw, P. K., Yeh, A. C., Lee, S. Y., Jain, J. & Huang, E-W., 15 3月 2022, 於: Scripta Materialia. 210, p. 1-7 7 p., 114459.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Hydrogen Embrittlement of a Boiler Water Wall Tube in a District Heating System

Kim, Y. S., Kim, W. C., Jain, J., Huang, E. W. & Lee, S. Y., 8月 2022, 於: Metals. 12, 8, 1276.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Machine-learning and high-throughput studies for high-entropy materials

Huang, E-W., Lee, W. J., Singh, S. S., Kumar, P., Lee, C. Y., Lam, T. N., Chin, H. H., Lin, B. H. & Liaw, P. K., 1月 2022, 於: Materials Science and Engineering R: Reports. 147, p. 1-47 47 p., 100645.

研究成果: Article › 同行評審

15 引文斯高帕斯（Scopus）

Microstructural Evolution and Mechanical Properties of Non-Equiatomic (CoNi)_74.66Cr₁₇Fe₈C_0.34 High-Entropy Alloy

Kim, Y. S., Chae, H., Huang, E. W., Jain, J., Harjo, S., Kawasaki, T., Hong, S. I. & Lee, S. Y., 1 2月 2022, 於: Materials. 15, 4, 1312.

研究成果: Article › 同行評審

開啟存取

Microstructure evolution in high-pressure phase transformations of CrFeNi and CoCrFeMnNi alloys

Wang, C. C., Chen, J. H., Yeh, J. W., Lin, S. J., Chang, S. Y., Lo, Y. C., Yen, C. C., Lin, K. H., Tseng, C. M., Lam, T. N., Chen, S. A., Wu, C. S., Chang, C. K., Lin, B. H., Tang, M. T., Sheu, H. S., Chen, S. W. & Huang, E. W., 15 10月 2022, 於: Journal of Alloys and Compounds. 918, 165383.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Recent progress in oxidation behavior of high-entropy alloys: A review

Kumar, P., Lam, T. N., Tripathi, P. K., Singh, S. S., Liaw, P. K. & Huang, E. W., 1 12月 2022, 於: APL Materials. 10, 12, 120701.

研究成果: Article › 同行評審

開啟存取

Tailoring Ferrimagnetic Transition Temperatures, Coercivity Fields, and Saturation Magnetization by Modulating Mn Concentration in (CoCrFeNi)_1−xMn_x High-Entropy Alloys

Lee, C. H., Chin, H. H., Zeng, K. Y., Chang, Y. J., Yeh, A. C., Yeh, J. W., Lin, S. J., Wang, C. C., Glatzel, U. & Huang, E. W., 28 1月 2022, 於: Frontiers in Materials. 9, 824285.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Tensile Response of As-Cast CoCrFeNi and CoCrFeMnNi High-Entropy Alloys

Lam, T. N., Luo, M. Y., Kawasaki, T., Harjo, S., Jain, J., Lee, S. Y., Yeh, A. C. & Huang, E. W., 2月 2022, 於: Crystals. 12, 2, 157.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Thermal effects on stability of hierarchical microstructure in medium- and high-entropy alloys

Wang, C. C., Lin, S. J., Chang, S. Y., Lo, Y-C., Chen, J. F., Chuang, Y. C., Lam, T. N., Sheu, H. S. & Huang, E-W., 15 2月 2022, 於: Materials Chemistry and Physics. 278, p. 1-8 8 p., 125677.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Transient Phase-Driven Cyclic Deformation in Additively Manufactured 15-5 PH Steel

Lam, T. N., Wu, Y. H., Liu, C. J., Chae, H., Lee, S. Y., Jain, J., An, K. & Huang, E. W., 1 2月 2022, 於: Materials. 15, 3, 777.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Unearthing principal strengthening factors tuning the additive manufactured 15-5 PH stainless steel

Chae, H., Luo, M. Y., Huang, E. W., Shin, E., Do, C., Hong, S. K., Woo, W. & Lee, S. Y., 2月 2022, 於: Materials Characterization. 184, 111645.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Visualizing the valence states of europium ions in Eu-doped BaAl₂O₄using X-ray nanoprobe mapping

Wu, Y. H., Lin, Y. Y., Chen, J. L., Fu, S. Y., Huang, S. C., Lee, C. Y., Chen, B. Y., Yin, G. C., Huang, E. W., Tang, M. T. & Lin, B. H., 1 3月 2022, 於: Journal of Synchrotron Radiation. 29, p. 456-461 6 p.

研究成果: Article › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

2021

Aging temperature role on precipitation hardening in a non-equiatomic AlCoCrFeNiTi high-entropy alloy

Nandal, V., Hariharan, K., Sarvesha, R., Singh, S. S., Huang, E. W., Chang, Y. J., Yeh, A. C., Neelakantan, S. & Jain, J., 2021, 於: Materials Science and Technology. 37, 15, p. 1270-1279 10 p.

研究成果: Article › 同行評審

Influence of pre-deformation on the precipitation characteristics of aged non-equiatomic Co_1.5CrFeNi_1.5 high entropy alloys with Ti and Al additions

Nandal, V., Sarvesha, R., Singh, S. S., Huang, E-W., Chang, Y. J., Yeh, A. C., Neelakantan, S. & Jain, J., 25 2月 2021, 於: Journal of Alloys and Compounds. 855, 11 p., 157521.

研究成果: Article › 同行評審

16 引文斯高帕斯（Scopus）

In-situ synchrotron SAXS and WAXS investigation on the deformation of single and coaxial electrospun P(VDF-TrFE)-based nanofibers

Huang, Y. J., Chen, Y. F., Hsiao, P. H., Lam, T. N., Ko, W. C., Luo, M. Y., Chuang, W. T., Su, C. J., Chang, J. H., Chung, C. F. & Huang, E-W., 1 12月 2021, 於: International Journal Of Molecular Sciences. 22, 23, p. 1-20 20 p., 12669.

研究成果: Article › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Pentafluoropyridine functionalized novel heteroatom-doped with hierarchical porous 3D cross-linked graphene for supercapacitor applications

Kumar, A., Tan, C-S., Kumar, N., Singh, P., Sharma, Y., Leu, J-P., Huang, E-W., Winie, T., Wei, K-H. & Tseng, T-Y., 12 7月 2021, 於: RSC Advances. 11, 43, p. 26892-26907 16 p.

研究成果: Article › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Regulation of cell differentiation via synergistic self-powered stimulation and degradation behavior of a biodegradable composite piezoelectric scaffold for cartilage tissue

Lai, Y. H., Chen, Y. H., Pal, A., Chou, S. H., Chang, S. J., Huang, E-W., Lin, Z. H. & Chen, S-Y., 12月 2021, 於: Nano Energy. 90, p. 1-12 12 p., 106545.

研究成果: Article › 同行評審

18 引文斯高帕斯（Scopus）

Revealing the Precipitation Sequence with Aging Temperature in a Non-equiatomic AlCoCrFeNi High Entropy Alloy

Nandal, V., Harun, B., Sarvesha, R., Singh, S. S., Huang, E. W., Chang, Y. J., Yeh, A. C., Jain, J. & Neelakantan, S., 2021, (Accepted/In press) 於: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Reversal of favorable microstructure under plastic ploughing vs. interfacial shear induced wear in aged Co_1.5CrFeNi_1.5Ti_0.5 high-entropy alloy

Kumar, D., B, J., Meena, D. K., Huang, E-W., Chang, Y. J., Yeh, A. C., Jain, J., Neelakantan, S. & Gosvami, N. N., 15 3月 2021, 於: Wear. 468-469, 8 p., 203595.

研究成果: Article › 同行評審

7 引文斯高帕斯（Scopus）

Tailoring grain sizes of the biodegradable iron-based alloys by pre-additive manufacturing microalloying

Huang, C. C., Lam, T. N., Amalia, L., Chen, K. H., Yang, K. Y., Muslih, M. R., Singh, S. S., Tsai, P. I., Lee, Y. T., Jain, J., Lee, S. Y., Lai, H. J., Huang, W. C., Chen, S. Y. & Huang, E-W., 12月 2021, 於: Scientific reports. 11, 1, p. 1-12 12 p., 9610.

研究成果: Article › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Tunable Mechanical and Electrical Properties of Coaxial Electrospun Composite Nanofibers of P(VDF-TrFE) and P(VDF-TrFE-CTFE)

Lam, T. N., Ma, C. Y., Hsiao, P. H., Ko, W. C., Huang, Y. J., Lee, S. Y., Jain, J. & Huang, E-W., 1 5月 2021, 於: International Journal Of Molecular Sciences. 22, 9, p. 1-15 15 p., 4639.

研究成果: Article › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

2020

Characterization of Deformation and Wear Mechanisms during Indentation Scratching on Pure Zinc

Gokhale, A., Jain, J., Prasad, R., Huang, E-W. & Lee, S. Y., 1 1月 2020, 於: Journal of Tribology. 142, 1, 7 p., 011701.

研究成果: Article › 同行評審

1 引文斯高帕斯（Scopus）

Crystal plasticity modeling and neutron diffraction measurements of a magnesium AZ31B plate: Effects of plastic anisotropy and surrounding grains

Wang, H., Lee, S. Y., Huang, E-W., Jain, J., Li, D., Peng, Y., Choi, H. S. & Wu, P., 2月 2020, 於: Journal of the Mechanics and Physics of Solids. 135, p. 1-20 20 p., 103795.

研究成果: Article › 同行評審

20 引文斯高帕斯（Scopus）

Deformations of Ti-6Al-4V additive-manufacturing-induced isotropic and anisotropic columnar structures: Insitu measurements and underlying mechanisms

Tseng, J. C., Huang, W. C., Chang, W., Jeromin, A., Keller, T. F., Shen, J., Chuang, A. C., Wang, C. C., Lin, B. H., Amalia, L., Tsou, N-T., Shih, S. J. & Huang, E-W., 10月 2020, 於: Additive Manufacturing. 35, p. 1-11 11 p., 101322.

研究成果: Article › 同行評審

24 引文斯高帕斯（Scopus）

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

Du, X. H., Li, W. P., Chang, H. T., Yang, T., Duan, G. S., Wu, B. L., Huang, J. C., Chen, F. R., Liu, C. T., Chuang, W. S., Lu, Y., Sui, M. L. & Huang, E-W., 13 5月 2020, 於: Nature Communications. 11, 1, 7 p., 2390.

研究成果: Article › 同行評審

開啟存取

檔案

168 引文斯高帕斯（Scopus）

Element Effects of Mn and Ge on the Tuning of Mechanical Properties of High-Entropy Alloys

Tu-Ngoc Lam, Tsai, C-W., Chen, B-K., Lai, B-H., Liu, H-C., Kawasaki, T., Harjo, S., Lin, B-H. & Huang, E-W., 10月 2020, 於: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 10, p. 5023-5028 6 p.

研究成果: Article › 同行評審

11 引文斯高帕斯（Scopus）

Enhanced age hardening effects in FCC based Co_1.5CrFeNi_1.5 high entropy alloys with varying Ti and Al contents

Nandal, V., Sarvesha, R., Singh, S. S., Huang, E. W., Chang, Y. J., Yeh, A. C., Jain, J. & Neelakantan, S., 9月 2020, 於: Materialia. 13, 100823.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

Enhancement of fatigue resistance by overload-induced deformation twinning in a CoCrFeMnNi high-entropy alloy

Lam, T. N., Lee, S. Y., Tsou, N-T., Chou, H. S., Lai, B. H., Chang, Y. J., Feng, R., Kawasaki, T., Harjo, S., Liaw, P. K., Yeh, A. C., Li, M. J., Cai, R. F., Lo, S. C. & Huang, E-W., 12月 2020, 於: Acta Materialia. 201, p. 412-424 13 p.

研究成果: Article › 同行評審

32 引文斯高帕斯（Scopus）

Investigation of Bone Growth in Additive-Manufactured Pedicle Screw Implant by Using Ti-6Al-4V and Bioactive Glass Powder Composite

Lam, T. N., Trinh, M. G., Huang, C. C., Kung, P. C., Huang, W. C., Chang, W., Amalia, L., Chin, H. H., Tsou, N-T., Shih, S. J., Chen, S-Y., Wang, C. C., Tsai, P. I., Wu, M. H. & Huang, E-W., 10月 2020, 於: International journal of molecular sciences. 21, 20, p. 1-13 13 p., 7438.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

Lattice distortion effect on elastic anisotropy of high entropy alloys

Yen, C. C., Huang, G. R., Tan, Y. C., Yeh, H. W., Luo, D. J., Hsieh, K. T., Huang, E. W., Yeh, J. W., Lin, S. J., Wang, C. C., Kuo, C. L., Chang, S. Y. & Lo, Y. C., 25 3月 2020, 於: Journal of Alloys and Compounds. 818, 152876.

研究成果: Article › 同行評審

23 引文斯高帕斯（Scopus）

Nanowear Mechanisms of Mg Alloyed with Al and Y at Elevated Temperatures

Gokhale, A., Meena, T., Lee, S. Y., Huang, E. W., Gosvami, N. N., Sinha, S. K. & Jain, J., 3 3月 2020, 於: Tribology Letters. 68, 1, 46.

研究成果: Article › 同行評審

5 引文斯高帕斯（Scopus）

On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy

Wang, H., Lee, S. Y., Wang, H., Woo, W., Huang, E-W., Jain, J. & An, K., 2月 2020, 於: Scripta Materialia. 176, p. 36-41 6 p.

研究成果: Article › 同行評審

10 引文斯高帕斯（Scopus）

Phase Stress Partition in Gray Cast Iron UsingIn SituNeutron Diffraction Measurements

Tu-Ngoc Lam, Wu, S-C., Chae, H., Chen, S-W., Jain, J., Lee, S. Y., An, K., Vogel, S. C., Chiu, S-M., Yu, D. & Huang, E-W., 10月 2020, 於: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 10, p. 5029–5035 7 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Tuning Stress in Cu Thin Films by Developing Highly (111)-Oriented Nanotwinned Structure

Wang, I-J., Ku, C-S., Tu-Ngoc Lam, Huang, E-W., Tu, K-N. & Chen, C., 1月 2020, 於: Journal of Electronic Materials. 49, 1, p. 109-115 7 p.

研究成果: Article › 同行評審

2 引文斯高帕斯（Scopus）

Ultramicrostructural reductions in teeth: implications for dietary transition from non-avian dinosaurs to birds

Li, Z., Wang, C-C., Wang, M., Chiang, C-C., Wang, Y., Zheng, X., Huang, E-W., Hsiao, K. & Zhou, Z., 21 4月 2020, 於: BMC Evolutionary Biology. 20, 1, 8 p., 46.

研究成果: Article › 同行評審

8 引文斯高帕斯（Scopus）

Unravelling thermal history during additive manufacturing of martensitic stainless steel

Chae, H., Huang, E-W., Woo, W., Kang, S. H., Jain, J., An, K. & Lee, S. Y., 15 3月 2020, 於: Journal of Alloys and Compounds. 857, p. 1-7 7 p., 157555.

研究成果: Article › 同行評審

13 引文斯高帕斯（Scopus）

2019

Calcitriol exerts a mineralization-inductive effect comparable to that of vitamin C in cultured human periodontium cells

Hong, H. H., Hong, A., Wang, C. C., Huang, E. W., Chiang, C. C., Yen, T. H. & Huang, Y. F., 15 4月 2019, 於: American Journal of Translational Research. 11, 4, p. 2304-2316 13 p.

研究成果: Article › 同行評審

9 引文斯高帕斯（Scopus）

Comparing cyclic tension-compression effects on CoCrFeMnNi high-entropy alloy and Ni-based superalloy

Lam, T. N., Chou, Y. S., Chang, Y. J., Sui, T. R., Yeh, A. C., Harjo, S., Lee, S. Y., Jain, J., Lai, B. H. & Huang, E-W., 8月 2019, 於: Crystals. 9, 8, 8 p., 420.

研究成果: Article › 同行評審

開啟存取

9 引文斯高帕斯（Scopus）

Control of dopant distribution in yttrium-doped bioactive glass for selective internal radiotherapy applications using spray pyrolysis

Tesfay, A. H., Chou, Y. J., Tan, C. Y., Bakare, F. F., Tsou, N-T., Huang, E-W. & Shih, S. J., 25 3月 2019, 於: Materials. 12, 6, 8 p., 986.

研究成果: Article › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Deviatoric deformation kinetics in high entropy alloy under hydrostatic compression

Huang, E-W., Lin, C. M., Juang, J-Y., Chang, Y. J., Chang, Y. W., Wu, C. S., Tsai, C. W., Yeh, A. C., Shieh, S. R., Wang, C. P., Chuang, Y. C., Liao, Y. F., Zhang, D., Huang, T., Lam, T. N. & Chen, Y. H., 5 7月 2019, 於: Journal of Alloys and Compounds. 792, p. 116-121 6 p.

研究成果: Article › 同行評審

開啟存取

13 引文斯高帕斯（Scopus）

Element Effects on High-Entropy Alloy Vacancy and Heterogeneous Lattice Distortion Subjected to Quasi-equilibrium Heating

Huang, E-W., Chou, H. S., Tu, K. N., Hung, W. S., Lam, T. N., Tsai, C. W., Chiang, C. Y., Lin, B. H., Yeh, A. C., Chang, S. H., Chang, Y. J., Yang, J. J., Li, X. Y., Ku, C. S., An, K., Chang, Y. W. & Jao, Y. L., 15 10月 2019, 於: Scientific reports. 9, 10 p., 14788.

研究成果: Article › 同行評審

開啟存取

26 引文斯高帕斯（Scopus）

Hardening steels by the generation of transient phase using additive manufacturing

Huang, E-W., Lee, S. Y., Jain, J., Tong, Y., An, K., Tsou, N-T., Lam, T. N., Yu, D., Chae, H., Chen, S. W., Chen, S. M. & Chou, H. S., 6月 2019, 於: Intermetallics. 109, p. 60-67 8 p.

研究成果: Article › 同行評審

開啟存取

19 引文斯高帕斯（Scopus）

High-temperature materials for structural applications: New perspectives on high-entropy alloys, bulk metallic glasses, and nanomaterials

Huang, E-W. & Liaw, P. K., 11月 2019, 於: MRS Bulletin. 44, 11, p. 847-853 7 p.

研究成果: Article › 同行評審

22 引文斯高帕斯（Scopus）

Multi-scale mapping for collagen-regulated mineralization in bone remodeling of additive manufacturing porous implants

Tsai, P. I., Lam, T. N., Wu, M. H., Tseng, K. Y., Chang, Y. W., Sun, J. S., Li, Y. Y., Lee, M. H., Chen, S-Y., Chang, C. K., Su, C. J., Lin, C. H., Chiang, C. Y., Ku, C. S., Tsou, N-T., Shih, S. J., Wang, C. C. & Huang, E-W., 15 5月 2019, 於: Materials Chemistry and Physics. 230, p. 83-92 10 p.

研究成果: Article › 同行評審

開啟存取

15 引文斯高帕斯（Scopus）

黃 爾文

研究成果

搜尋結果

黃爾文