每年專案
個人檔案
研究專長
飛秒雷射精微製造、 雷射積層製造
經歷
2008/2 ~ 2014/01 工業技術研究院雷射中心經理
2014/02 ~ 2017/7 國立交通大學機械系助理教授
2017/8 ~ 迄今 國立交通大學機械系副教授
教育/學術資格
PhD, 機械系, National Cheng Kung University
外部位置
指紋
查看啟用 Chung-Wei Cheng 的研究主題。這些主題標籤來自此人的作品。共同形成了獨特的指紋。
- 1 類似的個人檔案
網路
國家/地區層面的近期外部共同作業。按一下圓點深入探索詳細資料,或
-
-
磁性元件積層製造之虛實加工整合技術開發-磁性元件積層製造之虛實加工整合技術開發(2/4)
1/06/22 → 31/05/23
研究計畫: Other Government Ministry Institute
-
-
-
-
Coloring of titanium by CW fiber laser irradiation and infrared temperature measurement
Cheng, C. W., Pasupulati, B. S. & Hsiao, W. T., 1 2月 2023, 於: Optics Communications. 528, 128983.研究成果: Article › 同行評審
-
Femtosecond laser structuring in the fabrication of periodic nanostructure on titanium for enhanced photoelectrochemical dopamine sensing performance
Chang, H. W., Chen, C. L., Jhu, S. J., Lin, G. W., Cheng, C. W. & Tsai, Y. C., 4月 2023, 於: Microchemical Journal. 187, 108423.研究成果: Article › 同行評審
-
Parametric FIR filtering for G-code interpolation with corner smoothing and zero circular contour error for NC systems
Huang, R. Y., Cheng, C. W. & Lee, A. C., 2023, (Accepted/In press) 於: International Journal of Advanced Manufacturing Technology.研究成果: Article › 同行評審
-
Acceleration-based FIR filters for trajectory interpolation with different kinematic constraints and target velocities for NC systems
Huang, R. Y., Cheng, C. W., Tsai, M. C. & Lee, A. C., 7月 2022, 於: Control Engineering Practice. 124, 105204.研究成果: Article › 同行評審
1 引文 斯高帕斯(Scopus) -
Additive manufacturing of NdFeB magnets by synchronized three-beam laser powder bed fusion
Yu, K. S., Cheng, C. W., Lee, A. C., Jhang Jian, W. Y., Chang, W. C., Chang, T. W. & Tsai, M. C., 2月 2022, 於: Optics and Laser Technology. 146, 107604.研究成果: Article › 同行評審