Studies on Ferroelectric Properties of Sol-Gel Derived Pb(Zr 0.53Ti0.47)O3 Using Ba0.5Sr 0.5Ruo3 as the Conductive Electrodes

Y. K. Wang*, C. H. Huang, Tseung-Yuen Tseng, Pang Lin

*Corresponding author for this work

    Research output: Contribution to journalArticlepeer-review

    3 Scopus citations

    Abstract

    Pb(Zr0.53Ti0.47)O3 (PZT) thin films with a (110) preferred orientation were prepared on Ba0.5Sr 0.5RuO3 (BSR)/Ru/SiO2/Si substrates using a sol-gel method. The oxide bottom electrode, BSR, was fabricated at various temperatures on Ru/SiO2/Si substrates by rf sputtering. The annealed PZT films on BSR/Ru/SiO2/Si substrates exhibited improved crystallinity. The electrical properties of PZT films, such as the electric field (E) induced variations of the leakage current density, the dielectric constant, and the polarization were strongly dependent on the processing temperatures of the PZT films as well as the bottom oxide electrode. A typical PZT thin film annealed at 650°C on the BSR electrode, which was deposited at 450°C on the Ru/SiO2/Si substrate by a sputtering technique, has a leakage current of 2.7 × 10-7 A/cm2 at an applied electric field of 500 kV/cm and a dielectric constant of 968. From the polarization-electric field characteristics, the remanent polarization and coercive field of the PZT were found to be 38.9 μC/cm2 and 59.6 kV/cm, respectively, at an applied voltage of 5 V. The PZT films exhibited fatigue-free characteristics up to ∼1.0 × 1012 switching cycles under 5 V bipolar pulses.

    Original languageEnglish
    Pages (from-to)F87-F91
    Number of pages5
    JournalJournal of the Electrochemical Society
    Volume151
    Issue number4
    DOIs
    StatePublished - 10 May 2004

    Fingerprint

    Dive into the research topics of 'Studies on Ferroelectric Properties of Sol-Gel Derived Pb(Zr <sub>0.53</sub>Ti<sub>0.47</sub>)O<sub>3</sub> Using Ba<sub>0.5</sub>Sr <sub>0.5</sub>Ruo<sub>3</sub> as the Conductive Electrodes'. Together they form a unique fingerprint.

    Cite this