Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography

Hui Hsin Lu; Chia Yu Lin; Tzu-Chien Hsiao; Kuo Chaun Ho; Jim Tunney; Dongfang Yang; Stephane Evoy; Chih Kung Lee; Chii Wann Lin

doi:10.1109/IEMBS.2007.4352773

Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography

Hui Hsin Lu, Chia Yu Lin, Tzu-Chien Hsiao, Kuo Chaun Ho, Jim Tunney, Dongfang Yang, Stephane Evoy, Chih Kung Lee, Chii Wann Lin^*

^*Corresponding author for this work

Department of Computer Science

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Abstract

We present a novel fabrication method by using dip pen nanolithography with Poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) for nitric oxide (NO) gas sensor in this report. PEDOT is a kind of conducting polymer which will change its conductance upon NO adsorption. Herein, we have used PEDOT with traditional thick film and DPN nanowires across electrodes. By using traditional thick film device, the lowest detection limit for NO is 3.87 ppm. The preliminary results of DPN nanowires can have aspect ratio (L/W) for up to 220 times and thus have large sensing surface area for higher sensitivity.

Original language	English
Title of host publication	29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07
Pages	2253-2256
Number of pages	4
DOIs	https://doi.org/10.1109/IEMBS.2007.4352773
State	Published - 2007
Event	29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07 - Lyon, France Duration: 23 Aug 2007 → 26 Aug 2007

Publication series

Name	Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings
ISSN (Print)	0589-1019

Conference

Conference	29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07
Country/Territory	France
City	Lyon
Period	23/08/07 → 26/08/07

Access to Document

10.1109/IEMBS.2007.4352773

Cite this

Lu, H. H., Lin, C. Y., Hsiao, T.-C., Ho, K. C., Tunney, J., Yang, D., Evoy, S., Lee, C. K., & Lin, C. W. (2007). Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography. In 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07 (pp. 2253-2256). Article 4352773 (Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings). https://doi.org/10.1109/IEMBS.2007.4352773

@inproceedings{2b9b482f079c475e8af7716fc66b5ea1,

title = "Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography",

abstract = "We present a novel fabrication method by using dip pen nanolithography with Poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) for nitric oxide (NO) gas sensor in this report. PEDOT is a kind of conducting polymer which will change its conductance upon NO adsorption. Herein, we have used PEDOT with traditional thick film and DPN nanowires across electrodes. By using traditional thick film device, the lowest detection limit for NO is 3.87 ppm. The preliminary results of DPN nanowires can have aspect ratio (L/W) for up to 220 times and thus have large sensing surface area for higher sensitivity.",

author = "Lu, {Hui Hsin} and Lin, {Chia Yu} and Tzu-Chien Hsiao and Ho, {Kuo Chaun} and Jim Tunney and Dongfang Yang and Stephane Evoy and Lee, {Chih Kung} and Lin, {Chii Wann}",

year = "2007",

doi = "10.1109/IEMBS.2007.4352773",

language = "English",

isbn = "1424407885",

series = "Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings",

pages = "2253--2256",

booktitle = "29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07",

note = "29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07 ; Conference date: 23-08-2007 Through 26-08-2007",

}

Lu, HH, Lin, CY, Hsiao, T-C, Ho, KC, Tunney, J, Yang, D, Evoy, S, Lee, CK & Lin, CW 2007, Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography. in 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07., 4352773, Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings, pp. 2253-2256, 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07, Lyon, France, 23/08/07. https://doi.org/10.1109/IEMBS.2007.4352773

Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography. / Lu, Hui Hsin; Lin, Chia Yu; Hsiao, Tzu-Chien et al.
29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07. 2007. p. 2253-2256 4352773 (Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography

AU - Lu, Hui Hsin

AU - Lin, Chia Yu

AU - Hsiao, Tzu-Chien

AU - Ho, Kuo Chaun

AU - Tunney, Jim

AU - Yang, Dongfang

AU - Evoy, Stephane

AU - Lee, Chih Kung

AU - Lin, Chii Wann

PY - 2007

Y1 - 2007

N2 - We present a novel fabrication method by using dip pen nanolithography with Poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) for nitric oxide (NO) gas sensor in this report. PEDOT is a kind of conducting polymer which will change its conductance upon NO adsorption. Herein, we have used PEDOT with traditional thick film and DPN nanowires across electrodes. By using traditional thick film device, the lowest detection limit for NO is 3.87 ppm. The preliminary results of DPN nanowires can have aspect ratio (L/W) for up to 220 times and thus have large sensing surface area for higher sensitivity.

AB - We present a novel fabrication method by using dip pen nanolithography with Poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) for nitric oxide (NO) gas sensor in this report. PEDOT is a kind of conducting polymer which will change its conductance upon NO adsorption. Herein, we have used PEDOT with traditional thick film and DPN nanowires across electrodes. By using traditional thick film device, the lowest detection limit for NO is 3.87 ppm. The preliminary results of DPN nanowires can have aspect ratio (L/W) for up to 220 times and thus have large sensing surface area for higher sensitivity.

UR - http://www.scopus.com/inward/record.url?scp=57649198286&partnerID=8YFLogxK

U2 - 10.1109/IEMBS.2007.4352773

DO - 10.1109/IEMBS.2007.4352773

M3 - Conference contribution

C2 - 18002439

AN - SCOPUS:57649198286

SN - 1424407885

SN - 9781424407880

T3 - Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings

SP - 2253

EP - 2256

BT - 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07

T2 - 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07

Y2 - 23 August 2007 through 26 August 2007

ER -

Lu HH, Lin CY, Hsiao TC, Ho KC, Tunney J, Yang D et al. Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography. In 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07. 2007. p. 2253-2256. 4352773. (Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings). doi: 10.1109/IEMBS.2007.4352773

Nano fabrication of conducting polymers for NO Gas by dip pen nanolithography

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this