Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock

Jau Woei Perng; Tung Li Hsieh

doi:10.1109/ECICE47484.2019.8942183

Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock

Jau Woei Perng
, Tung Li Hsieh

Institute of Electrical and Control Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This research project is to play music through the smart phone sound hole, and then to connect special-made Laser pointer to smart phone 's music plug. The Laser pointer will light up when the smart phone 's music starts playing. The result is that the music frequency is loaded into the light frequency. When solar panel receives light, it converts the frequency of the light signal into an electrical frequency signal. The current is amplified through the power amplifier and then the amplified current flows in sound recognition module. The sound recognition module performs audio comparison on the set sound signal, and after the comparison is correct, the output voltage activates the electromagnetic switch on the door to open or close. The main purpose of the present research is to provide an acousto-optic control lock device for performing electrical signal conversion on a specific sound command signal by an acousto-optic conversion module, thereby improving the reliability and safety of opening or closing the door lock.

Original language	English
Title of host publication	2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019
Editors	Teen-Hang Meen
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	358-361
Number of pages	4
ISBN (Electronic)	9781728125015
DOIs	https://doi.org/10.1109/ECICE47484.2019.8942183
State	Published - Oct 2019
Event	2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019 - Yunlin, Taiwan Duration: 3 Oct 2019 → 6 Oct 2019

Publication series

Name	2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019

Conference

Conference	2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019
Country/Territory	Taiwan
City	Yunlin
Period	3/10/19 → 6/10/19

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

electromagnetic lock
laser pointer
sound recognition module

Access to Document

10.1109/ECICE47484.2019.8942183

Cite this

Perng, J. W., & Hsieh, T. L. (2019). Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock. In T.-H. Meen (Ed.), 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019 (pp. 358-361). Article 8942183 (2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECICE47484.2019.8942183

Perng, Jau Woei ; Hsieh, Tung Li. / Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock. 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019. editor / Teen-Hang Meen. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 358-361 (2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019).

@inproceedings{72f17b0987824503891eed99f53a8dcd,

title = "Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock",

abstract = "This research project is to play music through the smart phone sound hole, and then to connect special-made Laser pointer to smart phone 's music plug. The Laser pointer will light up when the smart phone 's music starts playing. The result is that the music frequency is loaded into the light frequency. When solar panel receives light, it converts the frequency of the light signal into an electrical frequency signal. The current is amplified through the power amplifier and then the amplified current flows in sound recognition module. The sound recognition module performs audio comparison on the set sound signal, and after the comparison is correct, the output voltage activates the electromagnetic switch on the door to open or close. The main purpose of the present research is to provide an acousto-optic control lock device for performing electrical signal conversion on a specific sound command signal by an acousto-optic conversion module, thereby improving the reliability and safety of opening or closing the door lock.",

keywords = "electromagnetic lock, laser pointer, sound recognition module",

author = "Perng, \{Jau Woei\} and Hsieh, \{Tung Li\}",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019 ; Conference date: 03-10-2019 Through 06-10-2019",

year = "2019",

month = oct,

doi = "10.1109/ECICE47484.2019.8942183",

language = "English",

series = "2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "358--361",

editor = "Teen-Hang Meen",

booktitle = "2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019",

address = "美國",

}

Perng, JW & Hsieh, TL 2019, Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock. in T-H Meen (ed.), 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019., 8942183, 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019, Institute of Electrical and Electronics Engineers Inc., pp. 358-361, 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019, Yunlin, Taiwan, 3/10/19. https://doi.org/10.1109/ECICE47484.2019.8942183

Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock. / Perng, Jau Woei; Hsieh, Tung Li.
2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019. ed. / Teen-Hang Meen. Institute of Electrical and Electronics Engineers Inc., 2019. p. 358-361 8942183 (2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock

AU - Perng, Jau Woei

AU - Hsieh, Tung Li

PY - 2019/10

Y1 - 2019/10

N2 - This research project is to play music through the smart phone sound hole, and then to connect special-made Laser pointer to smart phone 's music plug. The Laser pointer will light up when the smart phone 's music starts playing. The result is that the music frequency is loaded into the light frequency. When solar panel receives light, it converts the frequency of the light signal into an electrical frequency signal. The current is amplified through the power amplifier and then the amplified current flows in sound recognition module. The sound recognition module performs audio comparison on the set sound signal, and after the comparison is correct, the output voltage activates the electromagnetic switch on the door to open or close. The main purpose of the present research is to provide an acousto-optic control lock device for performing electrical signal conversion on a specific sound command signal by an acousto-optic conversion module, thereby improving the reliability and safety of opening or closing the door lock.

AB - This research project is to play music through the smart phone sound hole, and then to connect special-made Laser pointer to smart phone 's music plug. The Laser pointer will light up when the smart phone 's music starts playing. The result is that the music frequency is loaded into the light frequency. When solar panel receives light, it converts the frequency of the light signal into an electrical frequency signal. The current is amplified through the power amplifier and then the amplified current flows in sound recognition module. The sound recognition module performs audio comparison on the set sound signal, and after the comparison is correct, the output voltage activates the electromagnetic switch on the door to open or close. The main purpose of the present research is to provide an acousto-optic control lock device for performing electrical signal conversion on a specific sound command signal by an acousto-optic conversion module, thereby improving the reliability and safety of opening or closing the door lock.

KW - electromagnetic lock

KW - laser pointer

KW - sound recognition module

UR - https://www.scopus.com/pages/publications/85077976744

U2 - 10.1109/ECICE47484.2019.8942183

DO - 10.1109/ECICE47484.2019.8942183

M3 - Conference contribution

AN - SCOPUS:85077976744

T3 - 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019

SP - 358

EP - 361

BT - 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019

A2 - Meen, Teen-Hang

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019

Y2 - 3 October 2019 through 6 October 2019

ER -

Perng JW, Hsieh TL. Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock. In Meen TH, editor, 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019. Institute of Electrical and Electronics Engineers Inc. 2019. p. 358-361. 8942183. (2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019). doi: 10.1109/ECICE47484.2019.8942183

Mobile Phone Audio Combined with Self-Made Laser Light Transmission Frequency Wireless Actuated Electromagnetic Lock

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this