TY - GEN
T1 - Mitigating lifetime underestimation
T2 - 15th Design, Automation and Test in Europe Conference and Exhibition, DATE 2012
AU - Wu, Kai-Chiang
AU - Lee, Ming Chao
AU - Marculescu, Diana
AU - Chang, Shih Chieh
PY - 2012
Y1 - 2012
N2 - Lifetime (long-term) reliability has been a main design challenge as technology scaling continues. Time-dependent dielectric breakdown (TDDB), negative bias temperature instability (NBTI), and electromigration (EM) are some of the critical failure mechanisms affecting lifetime reliability. Due to the correlation between different failure mechanisms and their significant dependence on the operating temperature, existing models assuming constant failure rate and additive impact of failure mechanisms will underestimate the lifetime of a system, usually measured by mean-time-to-failure (MTTF). In this paper, we propose a new methodology which evaluates system lifetime in MTTF and relies on Monte-Carlo simulation for verifying results. Temperature variations and the correlation between failure mechanisms are considered so as to mitigate lifetime underestimation. The proposed methodology, when applied on an Alpha 21264 processor, provides less pessimistic lifetime evaluation than the existing models based on sum of failure rate. Our experimental results also indicate that, by considering the correlation of TDDB and NBTI, the lifetime of a system is likely not dominated by TDDB or NBTI, but by EM or other failure mechanisms.
AB - Lifetime (long-term) reliability has been a main design challenge as technology scaling continues. Time-dependent dielectric breakdown (TDDB), negative bias temperature instability (NBTI), and electromigration (EM) are some of the critical failure mechanisms affecting lifetime reliability. Due to the correlation between different failure mechanisms and their significant dependence on the operating temperature, existing models assuming constant failure rate and additive impact of failure mechanisms will underestimate the lifetime of a system, usually measured by mean-time-to-failure (MTTF). In this paper, we propose a new methodology which evaluates system lifetime in MTTF and relies on Monte-Carlo simulation for verifying results. Temperature variations and the correlation between failure mechanisms are considered so as to mitigate lifetime underestimation. The proposed methodology, when applied on an Alpha 21264 processor, provides less pessimistic lifetime evaluation than the existing models based on sum of failure rate. Our experimental results also indicate that, by considering the correlation of TDDB and NBTI, the lifetime of a system is likely not dominated by TDDB or NBTI, but by EM or other failure mechanisms.
UR - http://www.scopus.com/inward/record.url?scp=84862082782&partnerID=8YFLogxK
U2 - 10.1109/DATE.2012.6176687
DO - 10.1109/DATE.2012.6176687
M3 - Conference contribution
AN - SCOPUS:84862082782
SN - 9783981080186
T3 - Proceedings -Design, Automation and Test in Europe, DATE
SP - 1269
EP - 1274
BT - Proceedings - Design, Automation and Test in Europe Conference and Exhibition, DATE 2012
Y2 - 12 March 2012 through 16 March 2012
ER -