Material Characterization and Electrochemical Performance of Hydrous Manganese Oxide Electrodes for Use in Electrochemical Pseudocapacitors

Jeng-Kuei Chang*, Wen Ta Tsai

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

266 Scopus citations

Abstract

Hydrous manganese oxide with promising pseudocapacitive behavior was deposited on a carbon substrate at anodic potentials of 0.5-0.95 V vs. saturated calomel electrode (SCE) in 0.25 M Mn(CH3COO)2 solution at 25°C. The effects of the deposition potential on the material characteristics and electrochemical performances of the hydrous manganese oxide prepared were investigated. Porous manganese oxide with higher crystallinity was formed at a lower deposition potential. When the deposition potential was 0.8 VSCE or higher, the deposited oxide consisted of an inner layer with a laminated structure and a rough outer layer with nodules on the surface. X-ray photoelectron spectroscopy was also carried out to examine the chemical state of the deposited oxide. Analytical results indicated that the oxide was composed of both trivalent and tetravalent manganese oxides at a deposition potential of 0.5 VSCE. However, the tetravalent manganese oxide became the dominant species in the film deposited at above 0.65 V SCE. The manganese oxide formed at 0.5 VSCE exhibited a specific capacitance as high as 240 F/g, as evaluated by cyclic voltammetry (CV) with a potential scan rate of 5 mV/s in 2 M KCl at 25°C. Increasing the CV scan rate reduced the specific capacitance. Only about 70% of the capacitance at 5 mV/s could be maintained when the CV scan rate was increased to 100 mV/s, for all the manganese oxide electrodes prepared. Moreover, a high deposition potential gave rise to a low specific capacitance of the manganese oxide formed.

Original languageEnglish
JournalJournal of the Electrochemical Society
Volume150
Issue number10
DOIs
StatePublished - 1 Jul 2003

Fingerprint

Dive into the research topics of 'Material Characterization and Electrochemical Performance of Hydrous Manganese Oxide Electrodes for Use in Electrochemical Pseudocapacitors'. Together they form a unique fingerprint.

Cite this