TY - JOUR
T1 - Improved performance of high-voltage vertical GaN LEDs via modification of micro-cell geometry
AU - Wu, Ping Chen
AU - Ou, Sin Liang
AU - Horng, Ray-Hua
AU - Wuu, Dong Sing
PY - 2017/5/24
Y1 - 2017/5/24
N2 - Vertical-type high-voltage light-emitting diodes (HV-LEDs) with 2 × 2 micro-cells were fabricated on Cu substrates, and the micro-cell geometry was modified to enhance the optoelectronic performance. The current spreading in micro-cell is most dominantly affected by the distance between electrode and edge of chip. When square cells were combined in a HV-LED, the device performance was poor due to an obvious current-crowding phenomenon that occurred near the electrodes. This was attributed that the electrodes in these four square micro-cells were all far away from the edges, resulting in the severe current-crowding phenomenon. On the contrary, as the HV-LED was prepared with four rectangle, triangle, or L-shaped micro-cells, the electrodes were close to the edges of micro-cells and the current spreading effect can be easily improved. Although a HV-LED connected with L-shaped cells possessed a better current spreading effect and a lower surface temperature, the light extraction was relatively low because of an electrode-shading loss effect. When triangular cells were used to prepare the HV-LED, the device achieved a superior optoelectronic performance compared with that of other cells because of a lower current-crowding effect and a more uniform light emission. After an epoxy package process, a lower forward voltage of 14.9 V and a higher output power of 353.2 mW were obtained using this HV-LED at an injection current of 80 mA. Additionally, the wall-plug efficiencies of this device at 20 and 80 mA were 41.1% and 29.7%, respectively. The results confirm that the design of triangular cell is beneficial for enhancing the optoelectronic performance of HV-LEDs. Furthermore, the fabrication processes of vertical LEDs have high potential for HV-LED applications.
AB - Vertical-type high-voltage light-emitting diodes (HV-LEDs) with 2 × 2 micro-cells were fabricated on Cu substrates, and the micro-cell geometry was modified to enhance the optoelectronic performance. The current spreading in micro-cell is most dominantly affected by the distance between electrode and edge of chip. When square cells were combined in a HV-LED, the device performance was poor due to an obvious current-crowding phenomenon that occurred near the electrodes. This was attributed that the electrodes in these four square micro-cells were all far away from the edges, resulting in the severe current-crowding phenomenon. On the contrary, as the HV-LED was prepared with four rectangle, triangle, or L-shaped micro-cells, the electrodes were close to the edges of micro-cells and the current spreading effect can be easily improved. Although a HV-LED connected with L-shaped cells possessed a better current spreading effect and a lower surface temperature, the light extraction was relatively low because of an electrode-shading loss effect. When triangular cells were used to prepare the HV-LED, the device achieved a superior optoelectronic performance compared with that of other cells because of a lower current-crowding effect and a more uniform light emission. After an epoxy package process, a lower forward voltage of 14.9 V and a higher output power of 353.2 mW were obtained using this HV-LED at an injection current of 80 mA. Additionally, the wall-plug efficiencies of this device at 20 and 80 mA were 41.1% and 29.7%, respectively. The results confirm that the design of triangular cell is beneficial for enhancing the optoelectronic performance of HV-LEDs. Furthermore, the fabrication processes of vertical LEDs have high potential for HV-LED applications.
KW - Current crowding effect
KW - High-voltage light emitting diodes
KW - Micro-cell geometry
KW - Spatial distribution image
KW - Vertical light emitting diodes
UR - http://www.scopus.com/inward/record.url?scp=85020046340&partnerID=8YFLogxK
U2 - 10.3390/app7060506
DO - 10.3390/app7060506
M3 - Article
AN - SCOPUS:85020046340
SN - 2076-3417
VL - 7
JO - Applied Sciences (Switzerland)
JF - Applied Sciences (Switzerland)
IS - 6
M1 - 506
ER -