Destruction of styrene in an air stream by packed dielectric barrier discharge reactors

This study presents the decomposition rates of styrene vapors with non-packed and packed bed dielectric barrier discharge reactors. The concentrations of intermediate byproducts at various plasma operation conditions were evaluated. The results showed that although styrene vapors could be almost completely removed at low styrene inlet concentration of 132ppm, the selectivity of CO₂ as the major product was rather low in a non-packed bed reactor. It was found that solid carbon containing compound was the major byproduct. An increase in the styrene inlet concentration tended to reduce the styrene removal efficiency, it also led to increase in the solid byproduct. The reactors that packed with glass, Al₂O₃ or Pt-Pd /Al₂O₃ pellets could improve the styrene decomposition efficiency and reduce the formation of intermediate products, of which the best oxidation of styrene to CO₂ could be achieved with a Pt-Pd /Al₂O₃ packed bed reactor. The carbon byproducts could also be reduced if the rector length was increased. The concentrations of ozone formed during the plasma process were also evaluated for the non-packed and packed bed reactors. The plasma reactor that packed with Pt-Pd /Al ₂O₃ pellets was proved to have the lowest O₃ concentration.