Design and analysis of digital data recovery circuits using oversampling

Shyh-Jye Jou*, C. H. Lin, Y. H. Chen, Z. H. Li

*Corresponding author for this work

    Research output: Contribution to journalArticlepeer-review

    8 Scopus citations

    Abstract

    A performance evaluation and circuit architecture for all-digital data recovery using an oversampling method is proposed. The architecture is very regular and hence very suitable for standard-cell implementation flow. Due to its feedforward architecture, the required bit-rate can be achieved through proper pipelining. These properties make the proposed architecture very suitable as soft silicon intellectual property. Analysis of BER due to the combined effects of the key design parameters like data jitter, clock jitter and oversampling ratio in the oversampling technique are carried out. Thus different specifications of data recovery can be designed with different design parameters. A module generator that can estimate the design parameters automatically is established. Design implementation shows the proposed all-digital data recovery circuit can achieve 3.07Gbit/s (post-layout) with 0.25m 2.5V CMOS technology standard-cell design and occupies 380×390m 2 chip area.

    Original languageEnglish
    Pages (from-to)93-101
    Number of pages9
    JournalIET Circuits, Devices and Systems
    Volume1
    Issue number1
    DOIs
    StatePublished - 19 Apr 2007

    Fingerprint

    Dive into the research topics of 'Design and analysis of digital data recovery circuits using oversampling'. Together they form a unique fingerprint.

    Cite this