Abstract
BiFeO3 (BFO) films were grown on LaNiO3-coated Si substrate by a RF magnetron sputtering system at temperatures in the range of 300-700 °C. X-ray reflectivity and high-resolution diffraction measurements were employed to characterize the microstructure of these films. For a substrate temperature below 300 °C and at 700 °C only partially crystalline films and completely randomly polycrystalline films were grown, whereas highly (001)-orientated BFO film was obtained for a substrate temperature in the range of 400-600 °C. The crystalline quality of BFO thin films increase as the deposition temperature increase except for the film deposited at 700 °C. The fitted result from X-ray reflectivity curves show that the densities of the BFO films are slightly less than their bulk values. For the BFO films deposited at 300-600 °C, the higher the deposition temperature, the larger the remnant polarization and surface roughness of the films present.
| Original language | English |
|---|---|
| Pages (from-to) | 7412-7415 |
| Number of pages | 4 |
| Journal | Thin Solid Films |
| Volume | 518 |
| Issue number | 24 |
| DOIs | |
| State | Published - 1 Oct 2010 |
Keywords
- RF sputtering
- Thin films
- X-ray diffraction