工業機器人應用於手機微小螺絲自動鎖附之實現

Translated title of the contribution: Automatically Tightening Tiny Screw to Cellphone with an Industry Robot

Jui Chen Lu, Pi Cheng Tung*, An Chen Lee

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

The objective of this research is to tighten tiny screws of the cellphone automatically by controlling a six-axis manipulator. The manipulator cooperates with two CCD cameras to perform initial positioning control and fine positioning control, respectively. One camera is fixed on a stationary frame above screw holes and the other is installed on the end effector of the manipulator. The captured images are processed and analyzed to detect the coordinate position of the screw holes. Through coordinate transformation and calculation, the hole positions of the space coordinate are found. A fine-tuning algorithm is developed to enhance the detection accuracy of hole position. Experimental results show that the proposed fine-tuning algorithm can tighten M1 and M1.1 screws into the target holes with the manipulator.

Translated title of the contributionAutomatically Tightening Tiny Screw to Cellphone with an Industry Robot
Original languageChinese (Traditional)
Pages (from-to)735-744
Number of pages10
JournalJournal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
Volume41
Issue number6
StatePublished - Dec 2020

Fingerprint

Dive into the research topics of 'Automatically Tightening Tiny Screw to Cellphone with an Industry Robot'. Together they form a unique fingerprint.

Cite this