School of Pharmaceutical Sciences

Research output

Research output per year 1978 2004 2005 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023

• 70841 Citations
• 111 h-index
• 2055 Article
• 89 Paper
• 81 Conference contribution
• 46 Review article
• 108 More
  • 38 Conference article
  • 29 Comment/debate
  • 21 Letter
  • 13 Chapter
  • 4 Editorial
  • 3 Short survey

Research output per year

Research output per year

Search results

• 2009

  Positron annihilation study in inorganic-polymer nano-composites

  Chen, H. M., Jean, Y. C., Lee, L. J., Yang, J. & Huang, J., 2009, In: Physica Status Solidi (C) Current Topics in Solid State Physics. 6, 11, p. 2397-2400 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • positron annihilation 100%
  • polystyrene 83%
  • composite materials 57%
  • polymers 54%
  • glass transition temperature 25%
  17 Scopus citations
• 2008

  Free volumes in polymer nanocomposites

  Chen, H. M., Lee, L. J., Yang, J., Gu, X. & Jean, Y. C., Nov 2008, In: Materials Science Forum. 607, p. 177-179 3 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Carbon nanofibers 100%
  • Free volume 99%
  • Free Volume 75%
  • Nanocomposites 73%
  • Carbon Nanofibre 73%
  8 Scopus citations

• Positronium chemistry in polymeric membrane systems

  Jean, Y. C., Chen, H. M., Lee, L. J., Yang, J., Gu, X., Hung, W. S., Lee, K. R., Lai, J. Y., Sun, Y. M. & Hu, C. C., 11 May 2008, In: Materials Science Forum. 607, p. 1-8 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Polymeric membranes 100%
  • Positrons 98%
  • Positronium 97%
  • positronium 75%
  • Positron annihilation 55%
  2 Scopus citations
• 2005

  Subcritical CO₂ assisted polymer surface engineering at low temperatures

  Yang, Y. & Lee, L. J., 2005, In: Materials Research Society Symposium Proceedings. 843, p. 43-48 6 p., T2.10.

  Research output: Contribution to journal › Conference article › peer-review

  • engineering 100%
  • Polymers 99%
  • polymers 78%
  • Reflectivity 62%
  • Neutrons 59%
• 2003

  Damage formation during fracture of polystyrene/clay and polystyrene/nanoporous silica nanocomposites

  Walter, M. E., Zeng, C., Li, W., Lannutti, J. J. & Lee, L. J., 2003, In: American Society of Mechanical Engineers, Materials Division (Publication) MD. 98, p. 181-187 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Polystyrenes 100%
  • Nanocomposites 93%
  • Silica 89%
  • Clay 85%
  • Exfoliation (materials science) 22%
  1 Scopus citations
• 2002

  Micro- and nano-fabrication of polymer based microfluidic platforms for BioMEMS applications

  Lai, S., Lee, L. J., Yu, L., Koelling, K. W. & Madou, M. J., 2002, In: Materials Research Society Symposium - Proceedings. 729, p. 17-27 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  • BioMEMS 100%
  • Microfabrication 71%
  • nanofabrication 67%
  • Nanotechnology 64%
  • Microfluidics 59%
  14 Scopus citations

• Polymer nanocomposite foams prepared by supercritical fluid foaming technology

  Lee, L. J., Zeng, C., Han, X., Tomasko, D. L. & Koelling, K. W., Apr 2002, In: Materials Research Society Symposium Proceedings. 733 E, p. 18-23 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Supercritical fluids 100%
  • foaming 94%
  • supercritical fluids 93%
  • Supercritical Fluid 82%
  • Nanocomposites 77%
  1 Scopus citations
• 2000

  Biosensing on the CD microfluidic platform with genetically engineered proteins

  Wenner, B. R., Douglass, P. M., Daunert, S., Lu, Y., Madou Siyi Lai, M. J., Juang, Y. & Lee, L. J., 2000, In: SAE Technical Papers.

  Research output: Contribution to journal › Conference article › peer-review

  • fluidics 100%
  • Microfluidics 77%
  • Fluidics 67%
  • Proteins 67%
  • protein 53%

• Pulling force mechanism and its influence on injection pultrusion

  Li, S., Ding, Z., Li, M., Lee, L. J., Engelen, H. & Puckett, M., May 2000, In: International SAMPE Symposium and Exhibition (Proceedings). 45, p. II/-

  Research output: Contribution to journal › Conference article › peer-review

  • Pultrusion 100%
  • Force 47%
  • Resins 24%
  • Friction Coefficient 18%
  • Composite Material 17%
  1 Scopus citations

• Tackified SCRIMP for aerospace applications

  Shih, C. H., Liu, Q. & Lee, L. J., May 2000, In: International SAMPE Symposium and Exhibition (Proceedings). 45, p. I/-

  Research output: Contribution to journal › Conference article › peer-review

  • Aerospace applications 100%
  • Resin transfer molding 85%
  • Composite materials 48%
  • Composite Material 42%
  • Fibers 34%
  6 Scopus citations
• 1999

  Tackification of textile fiber preforms in resin transfer molding

  Shih, C. H., Lee, L. J. & Coyle, L. W., 25 May 1999, In: Annual Forum Proceedings - American Helicopter Society. 1, p. 783-797 15 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Preform 100%
  • Textile fibers 90%
  • Textile Fibres 87%
  • Resin transfer molding 74%
  • Resin 67%
• 1996

  Chemorheology of poly(urethane/isocyanurate) resins

  Sun, X., Toth, J. & Lee, L. J., 1996, In: Journal of Engineering and Applied Science. 2, p. 2429-2435 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Reaction injection molding 100%
  • Polyols 98%
  • Resins 61%
  • Catalysts 58%
  • Viscosity 55%
  1 Scopus citations

• Crystallization and structure formation of PP in the vicinity of hot-plate welded joints

  Nieh, J. Y. & Lee, L. J., 1996, In: Journal of Engineering and Applied Science. 2, p. 2240-2245 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Crystallization 100%
  • Welding 73%
  • Welds 73%
  • Temperature distribution 37%
  • Polymer melts 31%
  1 Scopus citations

• Manufacturing of composite links by structural reaction injection molding

  Castro, J., Conover, S., Wilkes, C., Han, K. & Lee, L. J., 5 May 1996, In: Journal of Engineering and Applied Science. 2, p. 2489-2496 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Reaction injection molding 100%
  • Geometry 41%
  • Impregnation 41%
  • Composite materials 39%
  • Resins 30%

• Preforming analysis and mechanical properties of composite parts made from textile preform RTM

  Tsai, J. S., Li, S. J. & Lee, L. J., 1996, In: International SAMPE Symposium and Exhibition (Proceedings). 41, 2, p. 1230-1244 15 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Preforming 100%
  • Resin transfer molding 84%
  • Textiles 65%
  • Mechanical properties 42%
  • Fiber 42%
  1 Scopus citations
• 1990

  Cure monitoring of graphite/epoxy composites by scaling analysis and heat flux sensors

  Perry, M. J., Lee, L. J. & Lee, C. W., Apr 1990, In: National SAMPE Symposium and Exhibition (Proceedings). 35, pt 2, p. 1251-1264 14 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Graphite epoxy composites 100%
  • Exothermic reactions 92%
  • Heat flux 60%
  • Heat transfer 45%
  • Heat problems 45%
• 1989

  Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)

  Liou, M. J., Young, W. B., Rupel, K., Han, K. & Lee, L. J., 1989, In: National SAMPE Technical Conference. 21, p. 1058-1066 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Reaction injection molding 100%
  • Resin transfer molding 87%
  • Flow visualization 25%
  • Fiber reinforced materials 24%
  • Computer simulation 12%
  5 Scopus citations

• Cure analysis of 'fast-cure' Sheet Molding Compounds (SMC)

  Fan, J. D. & Lee, L. J., 1989, In: Annual Technical Conference - Society of Plastics Engineers. p. 978-983 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Sheet molding compounds 100%
  • Curing 35%
  • Flow simulation 21%
  • Molecules 18%
  • Temperature distribution 15%

• Microstructure formation in the cure of low shrinkage unsaturated polyester resin

  Hsu, C. P. & Lee, L. J., 1989, In: Annual Technical Conference - Society of Plastics Engineers. p. 598-603 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Polyester resins 100%
  • Reaction kinetics 83%
  • Microstructure 50%
  • Polyesters 39%
  2 Scopus citations

• Orientation and residual stress distribution in plastic sheet extrusion

  Chan, T. W. D. & Lee, L. J., 1989, In: Annual Technical Conference - Society of Plastics Engineers. p. 31-34 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Plastic sheets 100%
  • Extrusion 64%
  • Residual stresses 58%
  • Stress concentration 57%
  • Shear flow 29%
  1 Scopus citations

• Resin-fiber interphase in glass fiber reinforced polyurethane and polyurethane-polyester hybrid

  Damani, S. & Lee, L. J., 1989, In: Annual Technical Conference - Society of Plastics Engineers. p. 1475-1479 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Polyurethanes 100%
  • Polyesters 98%
  • Glass fibers 91%
  • Resins 83%
  • Fibers 63%

• Rheo-kinetic changes in polyurea reaction injection molding

  Wang, K. J., Huang, Y. J. & Lee, L. J., 1989, In: Annual Technical Conference - Society of Plastics Engineers. p. 572-576 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Reaction injection molding 100%
  • Polymerization 77%
  • Reaction kinetics 50%
  • Nitrobenzene 39%
  • Composition effects 36%
• 1987

  KINETICS AND RHEOLOGICAL CHANGES OF THERMOSET POLYMERS IN REACTIVE PROCESSING.

  Lee, L. J., Lee, Y. M. & Yang, Y. S., 1987, In: Annual Technical Conference - Society of Plastics Engineers. p. 719-723 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Thermosets 100%
  • Resins 73%
  • Polymers 59%
  • Gelation 56%
  • Sheet molding compounds 53%

• MULTIVARIABLE FEEDFORWARD CONTROL OF PROFILE EXTRUSION.

  Yang, B. & Lee, L. J., 1987, In: Annual Technical Conference - Society of Plastics Engineers. p. 46-50 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Feedforward control 100%
  • Extrusion 81%
  • Extruders 33%
  • Feedback control 25%
  • Materials properties 23%

• USE OF FTIR-ATR TO DETERMINE MOLECULAR ORIENTATION IN EXTRUDED PLASTIC SHEETS.

  Chan, D. & Lee, L. J., 1987, In: Annual Technical Conference - Society of Plastics Engineers. p. 1014-1017 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Molecular orientation 100%
  • Plastic sheets 93%
  • Extrusion 30%
  • Temperature 25%
  • Cooling 10%
• 1986

  CURING STUDIES OF URETHANE BASED INTERPENETRATING POLYMER NETWORK (IPN) USING THERMAL AND SPECTROSCOPIC ANALYSIS.

  Yang, Y. S. & Lee, L. J., 1986, In: Annual Technical Conference - Society of Plastics Engineers. p. 419-423 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Spectroscopic analysis 100%
  • Interpenetrating polymer networks 96%
  • Calorimeters 73%
  • Polymerization 70%
  • Thermoanalysis 65%

• FAST CURE OF POLYESTER SHEET MOLDING COMPOUNDS.

  Fan, J. D., Huang, Y. J. & Lee, L. J., 1986, In: Annual Technical Conference - Society of Plastics Engineers. p. 1331-1335 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Sheet molding compounds 100%
  • Polyesters 79%
  • Molding 25%
  • Automotive industry 12%
  • Curing 11%
  1 Scopus citations
• 1985

  DYNAMIC BEHAVIOR OF A SINGLE SCREW PLASTICATING EXTRUDER.

  Nelson, R. W. & Lee, L. J., 1985, In: Annual Technical Conference - Society of Plastics Engineers. p. 54-58 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Extruders 100%
  • Extrusion 81%
  • Computer control 49%
  • Digital computers 47%
  • Transient analysis 41%

• MULTIDIMENSIONAL CONTROL OF PROFILE EXTRUSION BY THERMAL METHODS.

  Stevenson, J. F., Lee, L. J. & Griffith, R. M., 1985, In: Annual Technical Conference - Society of Plastics Engineers. p. 118-122 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Extrusion 100%
  • Hot Temperature 50%
  • Extruders 30%
  • Materials properties 21%
  3 Scopus citations

• OPTIMAL MOLDING OF POLYESTER SHEET MOLDING COMPOUND.

  Fan, J. D., Marinelli, J. M. & Lee, L. J., 1985, In: Annual Technical Conference - Society of Plastics Engineers. p. 1219-1223 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Sheet molding compounds 100%
  • Polyesters 79%
  • Molding 77%
  • Curing 71%
  • Copolymerization 55%

• POLYURETHANE-POLYESTER IPN IN REACTIVE POLYMER PROCESSING.

  Hsu, T. J. & Lee, L. J., 1985, In: Annual Technical Conference - Society of Plastics Engineers. p. 1304-1308 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Functional polymers 100%
  • Polyurethanes 63%
  • Polyesters 62%
  • Polymers 43%
  • Reaction injection molding 43%
• 1984

  DYNAMIC MODELLING OF A SINGLE SCREW PLASTICATING EXTRUDER.

  Chan, D. & Lee, L. J., 1984, In: Annual Technical Conference - Society of Plastics Engineers. p. 77-80 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  8 Scopus citations

• EFFECT OF COMPOUND COMPOSITION ON THE REACTION KINETICS OF POLYURETHANE RIM AND POLYESTER SMC.

  Huang, Y. J., Hsu, T. J. & Lee, L. J., 1984, In: Annual Technical Conference - Society of Plastics Engineers. p. 1020-1023 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• KINETICS OF FREE RADICAL POLYMERIZATIONS IN REACTIVE POLYMER PROCESSING.

  Huang, Y. J. & Lee, L. J., 1984, In: Annual Meeting - American Institute of Chemical Engineers. 37 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Functional polymers 100%
  • Free radical polymerization 95%
  • Free radicals 56%
  • Polymerization 44%
  • Free volume 28%

• ON-LINE COMPUTER CONTROL OF A PLASTICATING EXTRUDER.

  Yang, B. & Lee, L. J., 1984, In: Annual Meeting - American Institute of Chemical Engineers.

  Research output: Contribution to journal › Conference article › peer-review

  • Extruders 100%
  • Computer control 99%
  • Controllers 46%
  • Feedback 43%
  • Polymethyl methacrylates 22%

• PROCESSIBILITY AND MECHANICAL PROPERTIES OF RUBBER MODIFIED PMMA.

  Witchey, L. C., Chan, D. & Lee, L. J., 1984, In: Annual Technical Conference - Society of Plastics Engineers. p. 464-467 4 p.

  Research output: Contribution to journal › Conference article › peer-review
• 1983

  ANALYSIS OF RUBBER TRANSFER MOLDING.

  Lee, L. J., Griffith, R. M. & Sommer, J. G., 1983, In: Annual Technical Conference - Society of Plastics Engineers. p. 785-788 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Rubber molding 100%
  • Transfer molding 92%
  • Rubber 51%
  • Preheating 33%
  • Crystalline materials 30%
• 1979

  CONVERSION AND COMPOSITION PROFILES IN POLYURETHANE REACTION MOLDING.

  Tirrell, M., Lee, L. J. & Macosko, C. W., 31 Jul 1979, In: ACS Symposium Series. 10, p. 149-179 31 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Reaction injection molding 100%
  • Polymerization 77%
  • Polyurethanes 73%
  • Molding 69%
  • Chemical analysis 44%
  12 Scopus citations